X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t35.h;h=2bc486a59fd4056cacdcfba5820b45e954001358;hb=b0cf733933c3bc1b4ab353e16affabc60f863db5;hp=ef4a36ae79b1993db2b8578ad767b1341c200d34;hpb=ae56db5f1c476d76a3f61b9ba0b02bcaa9b3af4e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index ef4a36a..2bc486a 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -25,7 +25,6 @@
 #define CONFIG_OMAP	/* in a TI OMAP core */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_CM_T3X	/* working with CM-T35 and CM-T3730 */
-#define CONFIG_OMAP_COMMON
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
@@ -36,12 +35,6 @@
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Clock Defines */
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)
@@ -88,9 +81,6 @@
 					115200}
 
 #define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
 
 /* USB */
 #define CONFIG_USB_OMAP3
@@ -102,7 +92,6 @@
 /* USB device configuration */
 #define CONFIG_USB_DEVICE
 #define CONFIG_USB_TTY
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* commands to include */
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
@@ -264,20 +253,12 @@
 					 GENERATED_GBL_DATA_SIZE)
 
 /* Status LED */
-#define CONFIG_STATUS_LED		/* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED
-#define CONFIG_GPIO_LED
 #define GREEN_LED_GPIO			186 /* CM-T35 Green LED is GPIO186 */
-#define GREEN_LED_DEV			0
-#define STATUS_LED_BIT			GREEN_LED_GPIO
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT			GREEN_LED_DEV
 
 #define CONFIG_SPLASHIMAGE_GUARD
 
 /* GPIO banks */
-#ifdef CONFIG_STATUS_LED
+#ifdef CONFIG_LED_STATUS
 #define CONFIG_OMAP3_GPIO_6	/* GPIO186 is in GPIO bank 6  */
 #endif
 
@@ -287,7 +268,6 @@
 #define CONFIG_VIDEO_OMAP3
 #define LCD_BPP		LCD_COLOR16
 
-#define CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SOURCE
 #define CONFIG_CMD_BMP
@@ -300,26 +280,15 @@
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE