X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t335.h;h=ed7bb1d21c99a0beb714a39d33f9ce568f88d31e;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=6dbc9e980c9b1e2152561f57581acddc33559ec8;hpb=d7d000311285e4b8d11e089ca13ea456a01be3b8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 6dbc9e9..ed7bb1d 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -16,19 +16,14 @@
 
 #include <configs/ti_am335x_common.h>
 
-#undef CONFIG_BOARD_LATE_INIT
 #undef CONFIG_SPI
 #undef CONFIG_OMAP3_SPI
-#undef CONFIG_SPL_OS_BOOT
 #undef CONFIG_BOOTCOUNT_LIMIT
 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #undef CONFIG_MAX_RAM_BANK_SIZE
 #define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 512MB */
 
-#define CONFIG_OMAP_COMMON
-
-#define MACH_TYPE_CM_T335		4586	/* Until the next sync */
 #define CONFIG_MACH_TYPE		MACH_TYPE_CM_T335
 
 /* Clock Defines */
@@ -97,7 +92,6 @@
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
 #define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
-#define CONFIG_BAUDRATE			115200
 
 /* I2C Configuration */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
@@ -105,7 +99,7 @@
 #define CONFIG_SYS_I2C_EEPROM_BUS	0
 
 /* SPL */
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* Network. */
 #define CONFIG_PHY_GIGE
@@ -136,13 +130,11 @@
 #undef CONFIG_SYS_NAND_U_BOOT_OFFS
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
 
-#define CONFIG_CMD_NAND
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:2m(spl)," \
 					"1m(u-boot),1m(u-boot-env)," \
 					"1m(dtb),4m(splash)," \
 					"6m(kernel),-(rootfs)"
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x300000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
@@ -156,26 +148,15 @@
 #define GPIO_PIN(_bank, _pin)		((_bank << 5) + _pin)
 
 /* Status LED */
-#define CONFIG_STATUS_LED
-#define CONFIG_GPIO_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define STATUS_LED_BIT			GPIO_PIN(2, 0)
 /* Status LED polarity is inversed, so init it in the "off" state */
-#define STATUS_LED_STATE		STATUS_LED_OFF
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT			0
 
 /* EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 #define CONFIG_SYS_EEPROM_SIZE			256
 
-#define CONFIG_CMD_EEPROM_LAYOUT
-#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3"
-
 #ifndef CONFIG_SPL_BUILD
 /*
  * Enable PCA9555 at I2C0-0x26.