X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t335.h;h=ad2e88189075ee50ef0a14d7d9defe8dc68065a2;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=6bcc63ab0cc69bb23c628cc92d0f8045e4804471;hpb=d529124fdcf941c34074fd1ce600f4b1b4a7dd07;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 6bcc63a..ad2e881 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -1,37 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Config file for Compulab CM-T335 board
  *
  * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
  *
  * Author: Ilya Ledvich <ilya@compulab.co.il>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_CM_T335_H
 #define __CONFIG_CM_T335_H
 
-#define CONFIG_CM_T335
-#define CONFIG_NAND
-
 #include <configs/ti_am335x_common.h>
 
-#undef CONFIG_SPI
-#undef CONFIG_OMAP3_SPI
-#undef CONFIG_BOOTCOUNT_LIMIT
-#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
-
 #undef CONFIG_MAX_RAM_BANK_SIZE
 #define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 512MB */
 
-#define CONFIG_MACH_TYPE		MACH_TYPE_CM_T335
-
 /* Clock Defines */
 #define V_OSCK				25000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)
 
-#define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KiB */
-
 #ifndef CONFIG_SPL_BUILD
 #define MMCARGS \
 	"mmcdev=0\0" \
@@ -45,8 +32,8 @@
 		"bootm ${loadaddr}\0"
 
 #define NANDARGS \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"nandroot=ubi0:rootfs rw\0" \
 	"nandrootfstype=ubifs\0" \
 	"nandargs=setenv bootargs console=${console} " \
@@ -68,50 +55,23 @@
 	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 	MMCARGS \
 	NANDARGS
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loaduimage; then " \
-				"run mmcboot; " \
-			"else run nandboot; " \
-			"fi; " \
-		"fi; " \
-	"else run nandboot; fi"
 #endif /* CONFIG_SPL_BUILD */
 
-#define CONFIG_TIMESTAMP
 #define CONFIG_SYS_AUTOLOAD		"no"
 
 /* Serial console configuration */
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SERIAL1			1	/* UART0 */
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
 #define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
 
 /* I2C Configuration */
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_I2C_EEPROM_BUS	0
 
 /* SPL */
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* Network. */
-#define CONFIG_PHY_ATHEROS
 
 /* NAND support */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
@@ -125,21 +85,9 @@
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
-#undef CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
-
-#define MTDIDS_DEFAULT			"nand0=nand"
-#define MTDPARTS_DEFAULT		"mtdparts=nand:2m(spl)," \
-					"1m(u-boot),1m(u-boot-env)," \
-					"1m(dtb),4m(splash)," \
-					"6m(kernel),-(rootfs)"
-#define CONFIG_ENV_OFFSET		0x300000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS		0x400000 /* un-assigned: (using dtb) */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x500000
-#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
 #endif
 
 /* GPIO pin + bank to pin ID mapping */
@@ -149,11 +97,6 @@
 /* Status LED polarity is inversed, so init it in the "off" state */
 
 /* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-#define CONFIG_SYS_EEPROM_SIZE			256
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -161,11 +104,8 @@
  * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
  */
 #define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_SYS_I2C_PCA953X_ADDR	0x26
 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x26, 16} }
 #endif /* CONFIG_SPL_BUILD */
 
 #endif	/* __CONFIG_CM_T335_H */
-