X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_fx6.h;h=e62130f8ec0e9d332ce6c91104f864986b16a645;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=35328b164615f6644f992738de93e8261083bc6a;hpb=ebca902aeb3af3eaedd2787928184ad84a86b98f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 35328b1..e62130f 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Config file for Compulab CM-FX6 board
  *
  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
  *
  * Author: Nikita Kiryanov <nikita@compulab.co.il>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_CM_FX6_H
@@ -25,7 +24,6 @@
 #define PHYS_SDRAM_1			MMDC0_ARB_BASE_ADDR
 #define PHYS_SDRAM_2			MMDC1_ARB_BASE_ADDR
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x10010000
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -40,27 +38,7 @@
 #define CONFIG_MXC_UART_BASE		UART4_BASE
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
-/* SPI flash */
-#define CONFIG_SF_DEFAULT_BUS		0
-#define CONFIG_SF_DEFAULT_CS		0
-#define CONFIG_SF_DEFAULT_SPEED		25000000
-#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
-
-/* MTD support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_SPI_FLASH_MTD
-#endif
-
 /* Environment */
-#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
-#define CONFIG_ENV_SIZE			(8 * 1024)
-#define CONFIG_ENV_OFFSET		(768 * 1024)
 
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -156,8 +134,6 @@
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
 	BOOTENV
 
-#define CONFIG_PREBOOT		"usb start;sf probe"
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 2) \
@@ -168,9 +144,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS
 #endif
 
-/* SPI */
-#define CONFIG_SPI
-
 /* NAND */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NAND_BASE		0x40000000
@@ -180,13 +153,18 @@
 /* APBH DMA is required for NAND support */
 #endif
 
+/* SPI Flash Configs */
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#undef CONFIG_SPI_FLASH_MTD
+#endif
+
 /* Ethernet */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR		0
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_PHY_ATHEROS
-#define CONFIG_MII
 #define CONFIG_ETHPRIME			"FEC0"
 #define CONFIG_ARP_TIMEOUT		200UL
 #define CONFIG_NET_RETRY_COUNT		5
@@ -222,14 +200,11 @@
 
 /* misc */
 #define CONFIG_SYS_MALLOC_LEN			(10 * 1024 * 1024)
-#define CONFIG_MISC_INIT_R
 
 /* SPL */
 #include "imx6_spl.h"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
 
 /* Display */
-#define CONFIG_VIDEO_IPUV3
 #define CONFIG_IMX_HDMI
 
 #define CONFIG_SPLASH_SCREEN