X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm41xx.h;h=0e7a217433b012bfb438c1b1d9fc1a10fb7d6f0f;hb=3d6ba91e793808d1612152e9f9b8c51b3ca6c926;hp=02cb1efd0fe3857fe9ffa06706cb073d42a276cf;hpb=9eb468da3fd8753de55ab271d6ff5ed7f36d7ea2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
index 02cb1ef..0e7a217 100644
--- a/include/configs/cm41xx.h
+++ b/include/configs/cm41xx.h
@@ -31,8 +31,6 @@
 #define CONFIG_KS8695	1		/* it is a KS8695 CPU */
 #define CONFIG_CM41xx	1		/* it is an OpenGear CM41xx boad */
 
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-
 #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	 1
@@ -43,7 +41,6 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -53,11 +50,10 @@
  * select serial console configuration
  */
 #define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_KS8695_SERIAL
 #define	CONFIG_SERIAL1
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 
 /*
  * BOOTP options
@@ -93,29 +89,19 @@
 #define CONFIG_SYS_MEMTEST_START	0x00800000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x01000000	/* 16 MB in DRAM	*/
 
-#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
 
 #define CONFIG_SYS_HZ			(1000)		/* 1ms resolution ticks */
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1		0x00000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
+
+#define CONFIG_SYS_INIT_SP_ADDR	0x00020000 /* lowest 128k of RAM */
 
 #define PHYS_FLASH_1		0x02000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */