X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm-bf548.h;h=7f27eda416da7ecf3e4a8de60434f798cab8bf0f;hb=23c5d253d5fa4586e2342934a0a8ec21c1f21a36;hp=93c2239ea868a8118ac96badb777ac200cc00a94;hpb=c9005a72fee4231e30fe93c1741cea2342c54504;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index 93c2239..7f27eda 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -38,6 +38,9 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -61,7 +64,7 @@
 #define CONFIG_EBIU_FCTL_VAL	(BCLK_4)
 #define CONFIG_EBIU_MODE_VAL	(B0MODE_FLASH)
 
-#define CONFIG_SYS_MONITOR_LEN	(384 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(640 * 1024)
 
 
@@ -69,9 +72,9 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_DRIVER_SMC911X	1
-#define CONFIG_DRIVER_SMC911X_BASE	0x24000000
-#define CONFIG_DRIVER_SMC911X_16_BIT
+#define CONFIG_SMC911X	1
+#define CONFIG_SMC911X_BASE	0x24000000
+#define CONFIG_SMC911X_16_BIT
 #define CONFIG_HOSTNAME		cm-bf548
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:24:31:91 */
@@ -95,7 +98,7 @@
 #define CONFIG_ENV_ADDR		0x20008000
 #define CONFIG_ENV_OFFSET	0x8000
 #define CONFIG_ENV_SIZE		0x8000
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 
 
 /*
@@ -103,8 +106,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
@@ -114,11 +115,16 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	1
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS	"flashboot=bootm 0x20040000\0"
+
+#define CONFIG_ADI_GPIO2
 
 #ifndef __ADSPBF542__
 /* Don't waste time transferring a logo over the UART */
 # if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
 #  define CONFIG_VIDEO
+#  define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h>
 # endif
 # define CONFIG_DEB_DMA_URGENT
 #endif