X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm-bf548.h;h=02a46cae3d894d01f4eeb079ad5d857ee19f3b0d;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=7f27eda416da7ecf3e4a8de60434f798cab8bf0f;hpb=76a8265b4f54d1b9cd2b70efb46dcdeaa5d20bfb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index 7f27eda..02a46ca 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for cm-bf548 board
+ * U-Boot - Configuration file for cm-bf548 board
  */
 
 #ifndef __CONFIG_CM_BF548_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf548-0.0
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -41,7 +39,6 @@
 /* Decrease core voltage */
 #define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
 
-
 /*
  * Memory Settings
  */
@@ -67,7 +64,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(640 * 1024)
 
-
 /*
  * Network Settings
  */
@@ -76,9 +72,6 @@
 #define CONFIG_SMC911X_BASE	0x24000000
 #define CONFIG_SMC911X_16_BIT
 #define CONFIG_HOSTNAME		cm-bf548
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:24:31:91 */
-
 
 /*
  * Flash Settings
@@ -90,7 +83,6 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	259
 
-
 /*
  * Env Storage Settings
  */
@@ -100,19 +92,16 @@
 #define CONFIG_ENV_SIZE		0x8000
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 
-
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 /*
  * Misc Settings
  */
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	1
 #define CONFIG_BOOTCOMMAND	"run flashboot"
@@ -123,7 +112,6 @@
 #ifndef __ADSPBF542__
 /* Don't waste time transferring a logo over the UART */
 # if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-#  define CONFIG_VIDEO
 #  define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h>
 # endif
 # define CONFIG_DEB_DMA_URGENT
@@ -136,7 +124,6 @@
 #define FLASH_END_POST_BLOCK   71       /* Should < = 71 */
 #endif
 
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */