X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm-bf537u.h;h=282eb4f0b2908cdd6e6e8038a77f78ffc38eecfd;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=e60ebf20f0a18de3849836f13ed7ca240fa3f446;hpb=ac8983bcba75576c50307b5e8dc8fb848740ee61;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index e60ebf2..282eb4f 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for CM-BF537U board
+ * U-Boot - Configuration file for CM-BF537U board
  */
 
 #ifndef __CONFIG_CM_BF537U_H__
@@ -7,13 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
+#define CONFIG_BFIN_CPU             bf537-0.2
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -39,7 +38,6 @@
 /* Core voltage */
 #define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
 
-
 /*
  * Memory Settings
  */
@@ -53,25 +51,20 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
 #define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
 
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
-
 /*
  * Network Settings
  */
 #ifndef __ADSPBF534__
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_NET_MULTI
-/* The next 3 lines are for use with SMSC on EXT-BF5xx-USB-ETH2 */
-#define CONFIG_SMC911X	1
-#define CONFIG_SMC911X_BASE	0x24000000
+#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X_BASE	0x20308000
 #define CONFIG_SMC911X_16_BIT
+#define CONFIG_NETCONSOLE	1
 #endif
 #define CONFIG_HOSTNAME		cm-bf537u
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -84,18 +77,22 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	35
 
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ	30000000
 
 /*
  * Env Storage Settings
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	0x4000
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OFFSET	0x8000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE	0x8000
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
-#else
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
@@ -104,19 +101,22 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	arch/blackfin/lib/libblackfin.o (.text*); \
-	arch/blackfin/cpu/libblackfin.o (.text*); \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
 	common/env_embedded.o (.text*);
 #endif
 
-
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
+/*
+ * SPI_MMC Settings
+ */
+#define CONFIG_MMC_SPI
 
 /*
  * Misc Settings
@@ -127,9 +127,9 @@
 #define CONFIG_UART_CONSOLE	0
 #define CONFIG_BOOTCOMMAND	"run flashboot"
 #define FLASHBOOT_ENV_SETTINGS \
-	"flashboot=flread 20040000 1000000 280000;" \
+	"flashboot=flread 20040000 1000000 300000;" \
 	"bootm 0x1000000\0"
-
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
 
 /*
  * Pull in common ADI header for remaining command/environment setup