X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fclearfog.h;h=53ff830e8190225215a015b0395f0c6ffcf1dca0;hb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;hp=1141aee08b6e43a028929d734dd671e8e98288c9;hpb=89d811eee694ebd7dee0766e90552b91e89f60fb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 1141aee..53ff830 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -21,9 +21,6 @@
  * Commands configuration
  */
 
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_BUS		1
-
 /*
  * SDIO/MMC Card Configuration
  */
@@ -36,22 +33,17 @@
 
 /* Environment in MMC */
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_SECT_SIZE		0x200
-#define CONFIG_ENV_SIZE			0x10000
 /*
  * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC
  * boot image starts @ LBA-0.
  * As result in MMC/eMMC case it will be a 1 sector gap between u-boot
  * image and environment
  */
-#define CONFIG_ENV_OFFSET		0xf0000
-#define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
@@ -70,20 +62,9 @@
 	"initrd_high=0x10000000\0"
 
 /* SPL */
-/*
- * Select the boot device here
- *
- * Currently supported are:
- * SPL_BOOT_SPI_NOR_FLASH	- Booting via SPI NOR flash
- * SPL_BOOT_SDIO_MMC_CARD	- Booting via SDIO/MMC card (partition 1)
- */
-#define SPL_BOOT_SPI_NOR_FLASH		1
-#define SPL_BOOT_SDIO_MMC_CARD		2
-#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SDIO_MMC_CARD
 
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
-#define CONFIG_SPL_TEXT_BASE		0x40000030
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
 
 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
@@ -96,13 +77,10 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
+#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI)
 /* SPL related SPI defines */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
+#elif defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) || defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA)
 /* SPL related MMC defines */
 #define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
 #define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
@@ -132,9 +110,46 @@
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
+#ifndef CONFIG_SCSI
+#define BOOT_TARGET_DEVICES_SCSI_BUS0(func)
+#define BOOT_TARGET_DEVICES_SCSI_BUS1(func)
+#define BOOT_TARGET_DEVICES_SCSI_BUS2(func)
+#else
+/*
+ * With SCSI enabled, M.2 SATA is always located on bus 0
+ */
+#define BOOT_TARGET_DEVICES_SCSI_BUS0(func) func(SCSI, scsi, 0)
+
+/*
+ * Either one or both mPCIe slots may be configured as mSATA interfaces. The
+ * SCSI bus ids are assigned based on sequence of hardware present, not always
+ * tied to hardware slot ids. As such, use second SCSI bus if either slot is
+ * set for SATA, and only use third SCSI bus if both slots are SATA enabled.
+ */
+#if defined (CONFIG_CLEARFOG_CON2_SATA) || defined (CONFIG_CLEARFOG_CON3_SATA)
+#define BOOT_TARGET_DEVICES_SCSI_BUS1(func) func(SCSI, scsi, 1)
+#else
+#define BOOT_TARGET_DEVICES_SCSI_BUS1(func)
+#endif
+
+#if defined (CONFIG_CLEARFOG_CON2_SATA) && defined (CONFIG_CLEARFOG_CON3_SATA)
+#define BOOT_TARGET_DEVICES_SCSI_BUS2(func) func(SCSI, scsi, 2)
+#else
+#define BOOT_TARGET_DEVICES_SCSI_BUS2(func)
+#endif
+
+#endif /* CONFIG_SCSI */
+
+/*
+ * The SCSI buses are attempted in increasing bus order, there is no current
+ * mechanism to alter the default bus priority order for booting.
+ */
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
+	BOOT_TARGET_DEVICES_SCSI_BUS0(func) \
+	BOOT_TARGET_DEVICES_SCSI_BUS1(func) \
+	BOOT_TARGET_DEVICES_SCSI_BUS2(func) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
@@ -156,7 +171,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	RELOCATION_LIMITS_ENV_SETTINGS \
 	LOAD_ADDRESS_ENV_SETTINGS \
-	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	"console=ttyS0,115200\0" \
 	BOOTENV