X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcl-som-imx7.h;h=1043eb75060fd644d3ea40916b595226383c9012;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=f9ffb4de80666147429d8a54500a3afdcf844b9f;hpb=a09fea1d28fe3c69a64bee092f5a764274d26ca2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h
index f9ffb4d..1043eb7 100644
--- a/include/configs/cl-som-imx7.h
+++ b/include/configs/cl-som-imx7.h
@@ -12,52 +12,23 @@
 
 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
-
-#define CONFIG_BOARD_LATE_INIT
-
 /* Network */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          0
 
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
 /* ENET1 */
 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
 
 /* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE3000
 #define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
 
-/* I2C configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C2		/* Enable I2C bus 2 */
-#define CONFIG_SYS_I2C_SPEED		100000
-#define SYS_I2C_BUS_SOM			0
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_I2C_EEPROM_BUS	SYS_I2C_BUS_SOM
-
 #define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR	0x20
 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x20, 16} }
 
-#undef CONFIG_SYS_AUTOLOAD
 #undef CONFIG_EXTRA_ENV_SETTINGS
-#undef CONFIG_BOOTCOMMAND
-
-#define CONFIG_SYS_AUTOLOAD		"no"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"autoload=off\0" \
 	"script=boot.scr\0" \
 	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0" \
 	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0" \
@@ -72,7 +43,7 @@
 	"fdtaddr=0x83000000\0" \
 	"mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \
 	"usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcpart=1\0" \
 	"usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \
 	"doboot=bootz ${loadaddr} - ${fdtaddr}\0" \
 	"mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \
@@ -108,17 +79,6 @@
 	"emmcbootscript=setenv mmcdev 1; setenv mmcblk 2; run mmcbootscript\0" \
 	"emmcboot=setenv mmcdev 1; setenv mmcblk 2; run mmcboot\0" \
 
-#define CONFIG_BOOTCOMMAND \
-	"echo SD boot attempt ...; run sdbootscript; run sdboot; " \
-	"echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \
-	"echo USB boot attempt ...; run usbbootscript; "
-
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
@@ -126,11 +86,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* SPI Flash support */
 
 /* FLASH and environment organization */
@@ -140,17 +95,11 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
 
 #define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_MMCROOT			"/dev/mmcblk0p2" /* USDHC1 */
 #endif
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-
-/* Uncomment to enable iMX thermal driver support */
-/*#define CONFIG_IMX_THERMAL*/
 
 /* SPL */
 #include "imx7_spl.h"