X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcl-som-imx7.h;h=07f1893d1154b8fa0d0a1482aa9317f51a659718;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=36cf5769e987e8a19cc0aaa036070f083a886f60;hpb=1a7cdb88f58edc5f34f3cb6ba354022827a50b38;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h
index 36cf576..07f1893 100644
--- a/include/configs/cl-som-imx7.h
+++ b/include/configs/cl-som-imx7.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 CompuLab, Ltd.
  *
  * Configuration settings for the CompuLab CL-SOM-iMX7 System-on-Module.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CL_SOM_IMX7_CONFIG_H
@@ -11,28 +10,17 @@
 
 #include "mx7_common.h"
 
-#define CONFIG_DBG_MONITOR
-
 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
 
-#define CONFIG_BOARD_LATE_INIT
-
-/* Uncomment to enable secure boot support */
-/* #define CONFIG_SECURE_BOOT */
-#define CONFIG_CSF_SIZE			0x4000
-
 /* Network */
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          0
 
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
 /* ENET1 */
 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
 
@@ -42,10 +30,6 @@
 #define CONFIG_POWER_PFUZE3000
 #define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
 
-#undef CONFIG_BOOTM_NETBSD
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
 /* I2C configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
@@ -58,16 +42,13 @@
 #define CONFIG_SYS_I2C_EEPROM_BUS	SYS_I2C_BUS_SOM
 
 #define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR	0x20
 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x20, 16} }
 
 #undef CONFIG_SYS_AUTOLOAD
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #undef CONFIG_BOOTCOMMAND
-#undef CONFIG_BOOTDELAY
 
-#define CONFIG_BOOTDELAY		3
 #define CONFIG_SYS_AUTOLOAD		"no"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -127,14 +108,10 @@
 	"echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \
 	"echo USB boot attempt ...; run usbbootscript; "
 
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
@@ -147,29 +124,15 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* SPI Flash support */
-#define CONFIG_SPI
-#define CONFIG_SF_DEFAULT_BUS		0
-#define CONFIG_SF_DEFAULT_CS		0
-#define CONFIG_SF_DEFAULT_SPEED		20000000
-#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
 
 /* FLASH and environment organization */
-#define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_ENV_OFFSET		(768 * 1024)
-#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
-#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 
 /* MMC Config*/
-#define CONFIG_FSL_USDHC
 #ifdef CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
 
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2" /* USDHC1 */
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #endif
 
 /* USB Configs */
@@ -183,8 +146,5 @@
 
 /* SPL */
 #include "imx7_spl.h"
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
-#endif /* CONFIG_SPL_BUILD */
 
 #endif	/* __CONFIG_H */