X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcgtqmx6eval.h;h=cad1357f5cfd659bd0489da5433cb1c6b5e23e03;hb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;hp=3d6010e8f007f02e0ea8e5d6342fe89c1868585b;hpb=a380ce6e9698257c4e8be4c0711b09c90a8febff;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 3d6010e..cad1357 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -17,58 +17,183 @@
 
 #define CONFIG_MACH_TYPE	4122
 
+#ifdef CONFIG_SPL
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#define CONFIG_SPL_SPI_LOAD
+#include "imx6_spl.h"
+#endif
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	       UART2_BASE
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
+/* SPI NOR */
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_SPEED		20000000
+#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
+
+/* Thermal support */
+#define CONFIG_IMX_THERMAL
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
+/* USB Configs */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS	0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 
-#define CONFIG_DEFAULT_FDT_FILE "imx6q-congatec.dtb"
+#define CONFIG_USBD_HS
+
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
+
+/* Framebuffer */
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#ifdef CONFIG_MX6DL
+#define CONFIG_IPUV3_CLK 198000000
+#else
+#define CONFIG_IPUV3_CLK 264000000
+#endif
+#define CONFIG_IMX_HDMI
 
+/* SATA */
+#define CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_DWC_AHSATA_PORT_ID	0
+#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+
+/* Ethernet */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE		RGMII
+#define CONFIG_ETHPRIME			"FEC"
+#define CONFIG_FEC_MXC_PHYADDR		6
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+/* Command definition */
+
+#define CONFIG_MXC_UART_BASE	UART2_BASE
+#define CONSOLE_DEV	"ttymxc1"
+#define CONFIG_MMCROOT		"/dev/mmcblk0p2"
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"boot_dir=/boot\0" \
-	"console=ttymxc1\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdt_addr=0x18000000\0" \
+	"fdtfile=undefined\0" \
+	"fdt_addr_r=0x18000000\0" \
 	"boot_fdt=try\0" \
-	"mmcdev=1\0" \
+	"ip_dyn=yes\0" \
+	"console=" CONSOLE_DEV "\0" \
+	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
+	"dfu_alt_info_spl=spl raw 0x400\0" \
+	"dfu_alt_info_img=u-boot raw 0x10000\0" \
+	"dfu_alt_info=spl raw 0x400\0" \
+	"bootm_size=0x10000000\0" \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"update_sd_firmware=" \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"if mmc dev ${mmcdev}; then "	\
+			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
+				"setexpr fw_sz ${filesize} / 0x200; " \
+				"setexpr fw_sz ${fw_sz} + 1; "	\
+				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+			"fi; "	\
+		"fi\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
-		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
-		"${boot_dir}/${image}\0" \
-	"loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
-		"${boot_dir}/${fdt_file}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr_r}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+	"findfdt="\
+		"if test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-qmx6.dtb; fi; " \
+		"if test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-qmx6.dtb; fi; " \
+		"if test $fdtfile = undefined; then " \
+			"echo WARNING: Could not determine dtb to use; fi; \0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
+				"bootz ${loadaddr} - ${fdt_addr_r}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootz; " \
@@ -78,27 +203,23 @@
 			"fi; " \
 		"else " \
 			"bootz; " \
-		"fi;\0"
+		"fi;\0" \
+	"spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\
 
 #define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev};" \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else "\
-				   "echo ERR: Fail to boot from mmc; " \
-			   "fi; " \
-		   "fi; " \
-	   "else echo ERR: Fail to boot from mmc; fi"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT	       "CGT-QMX6-Quad U-Boot > "
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+	"run spilock;"	    \
+	"run findfdt; "	\
+	"mmc dev ${mmcdev};" \
+	"if mmc rescan; then " \
+		"if run loadbootscript; then " \
+		"run bootscript; " \
+		"else " \
+			"if run loadimage; then " \
+				"run mmcboot; " \
+			"else run netboot; " \
+			"fi; " \
+		"fi; " \
+	"else run netboot; fi"
 
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END	       0x10010000
@@ -107,7 +228,6 @@
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS	       1
 #define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			       (1u * 1024 * 1024 * 1024)
 
 #define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -119,15 +239,21 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_ENV_SIZE			(8 * 1024)
-
-#define CONFIG_ENV_IS_IN_MMC
-
+#if defined (CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
+#endif
+
+#define CONFIG_ENV_SIZE			(8 * 1024)
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_OFFSET		(768 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
+#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #endif
 
 #endif			       /* __CONFIG_CGTQMX6EVAL_H */