X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcapricorn-common.h;h=933fcfcfd28767fc6c17a99d86ebe126a8940999;hb=10f6e4dc3a16c21f235416f975ecf2070ceb351f;hp=254b3a5a760245c444aaf00aecde3c468b31edf2;hpb=7b5b9343139f934f1ce876e9466c065f20c8265c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h
index 254b3a5..933fcfc 100644
--- a/include/configs/capricorn-common.h
+++ b/include/configs/capricorn-common.h
@@ -11,23 +11,12 @@
 #include <asm/arch/imx-regs.h>
 
 #include "siemens-env-common.h"
-#include "siemens-ccp-common.h"
 
 /* SPL config */
 #ifdef CONFIG_SPL_BUILD
 
-#define CONFIG_SPL_MAX_SIZE		(124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		(1024 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x800
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION		0
-
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK		0x013E000
-#define CONFIG_SPL_BSS_START_ADDR	0x00128000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x00120000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
+
 #define CONFIG_MALLOC_F_ADDR		0x00120000
 
 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
@@ -37,34 +26,12 @@
 
 #define CONFIG_FACTORYSET
 
-#undef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING		GENERATE_CCP_VERSION("01", "07")
-
-#define CONFIG_REMAKE_ELF
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/* Commands */
-#define CONFIG_CMD_READ
-
-#undef CONFIG_CMD_EXPORTENV
-#undef CONFIG_CMD_IMPORTENV
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_CRC32
-#undef CONFIG_BOOTM_NETBSD
-
-/* ENET Config */
-#define CONFIG_FEC_XCV_TYPE		RMII
-#define FEC_QUIRK_ENET_MAC
-
 /* ENET1 connects to base board and MUX with ESAI */
 #define CONFIG_FEC_ENET_DEV		1
 #define CONFIG_FEC_MXC_PHYADDR		0x0
-#define CONFIG_ETHPRIME                "eth1"
 
 /* I2C Configuration */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_I2C_SPEED	400000
 /* EEPROM */
 #define  EEPROM_I2C_BUS		0 /* I2C0 */
 #define  EEPROM_I2C_ADDR	0x50
@@ -132,33 +99,9 @@
 	ENV_EMMC \
 	ENV_NET
 
-#define CONFIG_BOOTCOMMAND \
-	"if usrbutton; then " \
-		"run flash_self_test; " \
-		"reset; " \
-	"fi;" \
-	"run flash_self;" \
-	"reset;"
-
 /* Default location for tftp and bootm */
-#define CONFIG_LOADADDR			0x80280000
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_INIT_SP_ADDR		0x80200000
-
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_ENV
-
-/* Environment organisation */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* USDHC1, eMMC */
-#define CONFIG_SYS_MMC_ENV_PART		2	/* 2nd boot partition */
 
 /* On CCP board, USDHC1 is for eMMC */
-#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* eMMC */
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define PHYS_SDRAM_1			0x80000000
@@ -167,18 +110,6 @@
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1 GB */
 #define PHYS_SDRAM_2_SIZE		0x00000000	/* 0 GB */
 
-#define CONFIG_SYS_MEMTEST_START	0xA0000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
-					 (PHYS_SDRAM_1_SIZE >> 2))
-
-/* Console buffer and boot args */
-#define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		8000000	/* 8MHz */
-
 #define BOOTAUX_RESERVED_MEM_BASE	0x88000000
 #define BOOTAUX_RESERVED_MEM_SIZE	SZ_128M /* Reserve from second 128MB */