X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcalimain.h;h=d43e3314a75823f5377244c0f09d3877195068e5;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=5169b41b4f2af6c000cefa696125f6ce06a5ea7f;hpb=563e53efaadd76def21612bcf9f0236d870b6e68;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index 5169b41..d43e331 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -16,9 +16,7 @@
  * Board
  */
 #define CONFIG_DRIVER_TI_EMAC
-#define MACH_TYPE_CALIMAIN	3528
 #define CONFIG_MACH_TYPE	MACH_TYPE_CALIMAIN
-#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * SoC Configuration
@@ -33,8 +31,6 @@
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_TEXT_BASE		0x60000000
 #define CONFIG_DA850_LOWLEVEL
-#define CONFIG_SYS_DA850_PLL_INIT
-#define CONFIG_SYS_DA850_DDR_INIT
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DA8XX_GPIO
 #define CONFIG_HW_WATCHDOG
@@ -152,13 +148,11 @@
 /*
  * Serial Driver info
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
 
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
@@ -182,7 +176,6 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM	1
 #define CONFIG_MII
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
@@ -194,19 +187,15 @@
  * U-Boot general configuration
  */
 #define CONFIG_BOOTFILE        "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT      "Calimain > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_LOADADDR        0xc0700000
-#define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -218,11 +207,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTARGS           ""
 #define CONFIG_BOOTCOMMAND        "run checkupdate; run checkbutton;"
-#define CONFIG_BOOTDELAY          0
-#define CONFIG_ZERO_BOOTDELAY_CHECK   /* check for keypress on bootdelay==0 */
 #define CONFIG_BOOT_RETRY_TIME    60  /* continue boot after 60 s inactivity */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_DELAY_STR "\x0d" /* press ENTER to interrupt BOOT */
 #define CONFIG_RESET_TO_RETRY
 
 /*
@@ -313,21 +298,9 @@
 /*
  * U-Boot commands
  */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_GPIO
 
 #ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
 #endif
 
 /* additions for new relocation code, must added to all boards */
@@ -343,4 +316,6 @@
 int calimain_get_osc_freq(void);
 #endif
 
+#include <asm/arch/hardware.h>
+
 #endif /* __CONFIG_H */