X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fca9x4_ct_vxp.h;h=a7cd1d45ad1051074ddd1fac153a4bac71244bb7;hb=bb367b95f9204115bd6eac82e839b5590e6da4eb;hp=8c57eabb8caa87dcc60bfce02b8e197a7d301bfa;hpb=9023ae305919d0aecb4a22726b9d08c6b08189d7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
index 8c57eab..a7cd1d4 100644
--- a/include/configs/ca9x4_ct_vxp.h
+++ b/include/configs/ca9x4_ct_vxp.h
@@ -50,7 +50,6 @@
 #define VEXPRESS_FLASHPROG_FLVPPEN	(1 << 0)
 
 /* SMSC9115 Ethernet from SMSC9118 family */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X			1
 #define CONFIG_SMC911X_32_BIT		1
 #define CONFIG_SMC911X_BASE		0x4E000000
@@ -63,13 +62,14 @@
 #define CONFIG_CONS_INDEX		0
 
 #define CONFIG_BAUDRATE			38400
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_SERIAL0		0x10009000
 #define CONFIG_SYS_SERIAL1		0x1000A000
 
 /* Command line configuration */
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_FLASH
@@ -78,7 +78,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVEENV
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_RUN
 
 #define CONFIG_CMD_FAT
@@ -96,6 +95,9 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
+#define CONFIG_BOOTP_VCI_STRING		"U-boot.armv7.ca9x4_ct_vxp"
 
 /* Miscellaneous configurable options */
 #undef	CONFIG_SYS_CLKS_IN_HZ
@@ -103,13 +105,6 @@
 #define LINUX_BOOT_PARAM_ADDR		0x60000200
 #define CONFIG_BOOTDELAY		2
 
-/* Stack sizes are set up in start.S using the settings below */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ		(4 * 1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ		(4 * 1024)	/* FIQ stack */
-#endif
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		2
 #define PHYS_SDRAM_1			0x60000000	/* SDRAM Bank #1 */
@@ -129,10 +124,12 @@
 #define CONFIG_BOOTCOMMAND		"run bootflash;"
 #define CONFIG_EXTRA_ENV_SETTINGS \
 		"loadaddr=0x80008000\0" \
-		"initrd=0x61000000\0" \
-		"kerneladdr=0x44100000\0" \
-		"initrdaddr=0x44800000\0" \
-		"maxinitrd=0x1800000\0" \
+		"ramdisk_addr_r=0x61000000\0" \
+		"kernel_addr=0x44100000\0" \
+		"ramdisk_addr=0x44800000\0" \
+		"maxramdisk=0x1800000\0" \
+		"pxefile_addr_r=0x88000000\0" \
+		"kernel_addr_r=0x80008000\0" \
 		"console=ttyAMA0,38400n8\0" \
 		"dram=1024M\0" \
 		"root=/dev/sda1 rw\0" \
@@ -142,8 +139,8 @@
 			"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
 			"devtmpfs.mount=0  vmalloc=256M\0" \
 		"bootflash=run flashargs; " \
-			"cp ${initrdaddr} ${initrd} ${maxinitrd}; " \
-			"bootm ${kerneladdr} ${initrd}\0"
+			"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
+			"bootm ${kernel_addr} ${ramdisk_addr_r}\0"
 
 /* FLASH and environment organization */
 #define PHYS_FLASH_SIZE			0x04000000	/* 64MB */
@@ -166,6 +163,8 @@
 /* Room required on the stack for the environment data */
 #define CONFIG_ENV_SIZE			FLASH_MAX_SECTOR_SIZE
 
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
+
 /*
  * Amount of flash used for environment:
  * We don't know which end has the small erase blocks so we use the penultimate