X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbur_am335x_common.h;h=a94b1e27115574d99c875b885b0b958b528b4923;hb=e16e137c377c8b96d8d91263d0b6d8470169f841;hp=a558e42c90349eb58c25c77c58c1f6c06e5071c3;hpb=65994d049474394729d976273d7582552f1db332;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index a558e42..a94b1e2 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -3,7 +3,7 @@ * * common parts used by B&R AM335x based boards * - * Copyright (C) 2013 Hannes Petermaier - + * Copyright (C) 2016 Hannes Schmelzer - * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com * * SPDX-License-Identifier: GPL-2.0+ @@ -12,37 +12,9 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ -#define BUR_COMMON_ENV \ -"defaultip=192.168.60.253\0" \ -"defaultsip=192.168.60.254\0" \ -"netconsole=echo switching to network console ...; " \ -"if dhcp; then " \ -"setenv ncip ${serverip}; else " \ -"setenv ncip 192.168.60.254; " \ -"setenv serverip 192.168.60.254; " \ -"setenv gatewayip 192.168.60.254; " \ -"setenv ipaddr 192.168.60.1; " \ -"fi;" \ -"setenv netdisplay0 '" \ -"setcurs 1 9; puts myip; setcurs 10 9; puts ${ipaddr};" \ -"setcurs 1 10;puts serverip; setcurs 10 10; puts ${serverip}\;'" \ -"run netdisplay0; " \ -"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" - -#define CONFIG_CMD_TIME -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1366*767*4) -#define CONFIG_CMD_UNZIP -#define CONFIG_CMD_BMP -#define CONFIG_BMP_24BMP -#define CONFIG_BMP_32BPP - -#define CONFIG_SYS_GENERIC_BOARD - #define CONFIG_AM33XX #define CONFIG_OMAP #define CONFIG_OMAP_COMMON -#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ @@ -58,7 +30,6 @@ #include /* NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK 48000000 @@ -66,25 +37,11 @@ #define CONFIG_BAUDRATE 115200 /* Network defines */ -#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ -#define CONFIG_CMD_DHCP -#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 2 -#define CONFIG_CMD_PING #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ -#define CONFIG_SPL_ETH_SUPPORT #define CONFIG_PHYLIB #define CONFIG_PHY_NATSEMI -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */ -#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -/* Network console */ -#define CONFIG_NETCONSOLE 1 -#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ + /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and @@ -123,64 +80,8 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP24XX -#define CONFIG_CMD_I2C /* GPIO */ #define CONFIG_OMAP_GPIO -#define CONFIG_CMD_GPIO -/* - * ---------------------------------------------------------------------------- - * The following are general good-enough settings for U-Boot. We set a - * large malloc pool as we generally have a lot of DDR, and we opt for - * function over binary size in the main portion of U-Boot as this is - * generally easily constrained later if needed. We enable the config - * options that give us information in the environment about what board - * we are on so we do not need to rely on the command prompt. We set a - * console baudrate of 115200 and use the default baud rate table. - */ -#define CONFIG_SYS_MALLOC_LEN (5120 << 10) -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "U-Boot (BuR V2.0)# " -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ - -/* As stated above, the following choices are optional. */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE - -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* - * For commands to use, we take the default list and add a few other - * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH - * prior to this include, in order to skip a few commands. When we do - * have flash, if we expect these commands they must be enabled in that - * config. If desired, a specific list of desired commands can be used - * instead. - */ -#include -/* undefine commands, which we do not need */ -#undef CONFIG_CMD_EDITENV -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG -/* define command we need always */ -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SOURCE /* * Our platforms make use of SPL to initalize the hardware (primarily