X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbur_am335x_common.h;h=a6de28a42b2ed5b94ead73ce6d9cf89510d5002b;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=51585fcb3713bcccc475d698c6e2a9fe26fbc207;hpb=5371593aed56ee11cbb6cc6ac8d058fcd9b8f58c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 51585fc..a6de28a 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -19,16 +19,12 @@
 #define CONFIG_SYS_NS16550_CLK		(48000000)
 #define CONFIG_SYS_NS16550_COM1		0x44e09000
 
-#define CONFIG_SYS_I2C_LEGACY
-
 #endif /* CONFIG_DM */
 
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 
 /* Timer information */
-#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
-#define CONFIG_POWER_TPS65217
 
 #include <asm/arch/omap.h>
 
@@ -40,21 +36,11 @@
  * Y-MODEM to load u-boot.img, when booted over UART.  We must also include
  * the scratch space that U-Boot uses in SRAM.
  */
-#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
-					 CONFIG_SPL_TEXT_BASE)
 
 /*
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif /* !CONFIG_SPL_BUILD, ... */
-/*
- * Our DDR memory always starts at 0x80000000 and U-Boot shall have
- * relocated itself to higher in memory by the time this value is used.
- */
-#define CONFIG_SYS_LOAD_ADDR		0x80000000
 /*
  * ----------------------------------------------------------------------------
  * DDR information.  We say (for simplicity) that we have 1 bank,
@@ -62,8 +48,6 @@
  * and we place the initial stack pointer in our SRAM.
  */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
-					GENERATED_GBL_DATA_SIZE)
 
 /*
  * Our platforms make use of SPL to initalize the hardware (primarily
@@ -84,11 +68,6 @@
  *
  * ----------------------------------------------------------------------------
  */
-#define CONFIG_SPL_BSS_START_ADDR	0x80A00000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
-					CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
 
 /* General parts of the framework, required. */