X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbur_am335x_common.h;h=9b2e8b5c6ebb5b90eafd0c995496883220d6c85d;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=7aad7ea51f69a170d44e06bfc7e85b81d36e7cf5;hpb=5c84ad097d829bb1e6460438f33e1536b23b3c9b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 7aad7ea..9b2e8b5 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * bur_am335x_common.h
  *
@@ -5,36 +6,30 @@
  *
  * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> -
  * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
- *
- * SPDX-License-Identifier:        GPL-2.0+
  */
 
 #ifndef __BUR_AM335X_COMMON_H__
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
-#define CONFIG_AM33XX
+
+/* legacy #defines for non DM bur-board */
+#ifndef CONFIG_DM
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(48000000)
+#define CONFIG_SYS_NS16550_COM1		0x44e09000
+
+#endif /* CONFIG_DM */
+
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 
 /* Timer information */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
-#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC	/* enable 32kHz OSC at bootime */
 #define CONFIG_POWER_TPS65217
 
 #include <asm/arch/omap.h>
 
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		48000000
-#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
-
-/* Network defines */
-#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
-#define CONFIG_MII			/* Required in net/eth.c */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_NATSEMI
-
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
@@ -43,7 +38,6 @@
  * Y-MODEM to load u-boot.img, when booted over UART.  We must also include
  * the scratch space that U-Boot uses in SRAM.
  */
-#define CONFIG_SPL_TEXT_BASE		0x402F0400
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
 
@@ -51,31 +45,16 @@
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif /* !CONFIG_SPL_BUILD, ... */
-/*
- * Our DDR memory always starts at 0x80000000 and U-Boot shall have
- * relocated itself to higher in memory by the time this value is used.
- */
-#define CONFIG_SYS_LOAD_ADDR		0x80000000
 /*
  * ----------------------------------------------------------------------------
  * DDR information.  We say (for simplicity) that we have 1 bank,
  * always, even when we have more.  We always start at 0x80000000,
  * and we place the initial stack pointer in our SRAM.
  */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
 					GENERATED_GBL_DATA_SIZE)
 
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-#define CONFIG_SYS_I2C_OMAP24XX
-
 /*
  * Our platforms make use of SPL to initalize the hardware (primarily
  * memory) enough for full U-Boot to be loaded.  We also support Falcon
@@ -84,7 +63,6 @@
  * under common/spl/.  Given our generally common memory map, we set a
  * number of related defaults and sizes here.
  */
-#define CONFIG_SPL_FRAMEWORK
 /*
  * Place the image at the start of the ROM defined image space.
  * We limit our size to the ROM-defined downloaded image area, and use the
@@ -96,8 +74,6 @@
  *
  * ----------------------------------------------------------------------------
  */
-#undef  CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE		0x80800000
 #define CONFIG_SPL_BSS_START_ADDR	0x80A00000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
@@ -105,7 +81,5 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
 
 /* General parts of the framework, required. */
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 #endif	/* ! __BUR_AM335X_COMMON_H__ */