X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbur_am335x_common.h;h=42e3e568be7866b65f7b89c77b98990a2e7205e6;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=a94b1e27115574d99c875b885b0b958b528b4923;hpb=3b804d94ab8a25215e060f9fd0119146e9ead30b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index a94b1e2..42e3e56 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * bur_am335x_common.h
  *
@@ -5,52 +6,43 @@
  *
  * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> -
  * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
- *
- * SPDX-License-Identifier:        GPL-2.0+
  */
 
 #ifndef __BUR_AM335X_COMMON_H__
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
-#define CONFIG_AM33XX
-#define CONFIG_OMAP
-#define CONFIG_OMAP_COMMON
-#define CONFIG_SYS_CACHELINE_SIZE	64
+
+/* legacy #defines for non DM bur-board */
+#ifndef CONFIG_DM
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(48000000)
+#define CONFIG_SYS_NS16550_COM1		0x44e09000
+
+#define CONFIG_I2C
+#define CONFIG_SYS_I2C
+
+#endif /* CONFIG_DM */
+
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 
 /* Timer information */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
-#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC	/* enable 32kHz OSC at bootime */
-#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_POWER_TPS65217
 
-#define CONFIG_SYS_NO_FLASH		/* have no NOR-flash */
-
 #include <asm/arch/omap.h>
 
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		48000000
-#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
-#define CONFIG_BAUDRATE			115200
-
-/* Network defines */
-#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
-#define CONFIG_MII			/* Required in net/eth.c */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_NATSEMI
-
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
  * 0x4030B800 to 0x4030CE00 as a public stack area.  The ROM also
  * supports X-MODEM loading via UART, and we leverage this and then use
- * Y-MODEM to load u-boot.img, when booted over UART.
+ * Y-MODEM to load u-boot.img, when booted over UART.  We must also include
+ * the scratch space that U-Boot uses in SRAM.
  */
-#define CONFIG_SPL_TEXT_BASE		0x402F0400
-#define CONFIG_SPL_MAX_SIZE		(0x4030B800 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 /*
  * Since SPL did pll and ddr initialization for us,
@@ -70,19 +62,10 @@
  * always, even when we have more.  We always start at 0x80000000,
  * and we place the initial stack pointer in our SRAM.
  */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
 					GENERATED_GBL_DATA_SIZE)
 
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-#define CONFIG_SYS_I2C_OMAP24XX
-/* GPIO */
-#define CONFIG_OMAP_GPIO
-
 /*
  * Our platforms make use of SPL to initalize the hardware (primarily
  * memory) enough for full U-Boot to be loaded.  We also support Falcon
@@ -91,7 +74,6 @@
  * under common/spl/.  Given our generally common memory map, we set a
  * number of related defaults and sizes here.
  */
-#define CONFIG_SPL_FRAMEWORK
 /*
  * Place the image at the start of the ROM defined image space.
  * We limit our size to the ROM-defined downloaded image area, and use the
@@ -103,8 +85,6 @@
  *
  * ----------------------------------------------------------------------------
  */
-#undef  CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE		0x80800000
 #define CONFIG_SPL_BSS_START_ADDR	0x80A00000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
@@ -112,12 +92,5 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
 
 /* General parts of the framework, required. */
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_YMODEM_SUPPORT
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
 
 #endif	/* ! __BUR_AM335X_COMMON_H__ */