X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbrppt1.h;h=789e6a4c9d597b240ddbce1c613191d49272dca2;hb=c45568cc4e51b7bbe2f3ce28d8f2566048aeebf3;hp=3019b97d9299f78c55ac94c37661d1899d2b1bf8;hpb=88718be3001055fa2801a44ab10570279b3f2cb7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 3019b97..789e6a4 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -13,24 +13,14 @@
 
 #include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
+#include <linux/stringify.h>
 /* ------------------------------------------------------------------------- */
 /* memory */
-#define CONFIG_SYS_MALLOC_LEN		(5 * 1024 * 1024)
-#define CONFIG_SYS_BOOTM_LEN		SZ_32M
 
 /* Clock Defines */
 #define V_OSCK				26000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)
 
-#define CONFIG_POWER_TPS65217
-
-/* Support both device trees and ATAGs. */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-/*#define CONFIG_MACH_TYPE		3589*/
-#define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/
-
 /*
  * When we have NAND flash we expect to be making use of mtdparts,
  * both for ease of use in U-Boot and for passing information on to
@@ -38,31 +28,16 @@
  */
 
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR		0x80F80000
-
 /* RAW SD card / eMMC */
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
 
-/* NAND */
-#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS		0x140000
-#endif /* CONFIG_MTD_RAW_NAND */
 #endif /* CONFIG_SPL_OS_BOOT */
 
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #endif /* CONFIG_MTD_RAW_NAND */
 
 #ifdef CONFIG_MTD_RAW_NAND
 #define NANDTGTS \
-"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 "cfgscr=mw ${dtbaddr} 0; nand read ${cfgaddr} cfgscr && source ${cfgaddr};" \
 " fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0" \
 "nandargs=setenv bootargs console=${console} ${optargs} ${optargs_rot} " \
@@ -121,11 +96,9 @@ MMCSPI_TGTS \
 
 #define LOAD_OFFSET(x)			0x8##x
 
-#ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
 BUR_COMMON_ENV \
 "verify=no\0" \
-"autoload=0\0" \
 "scraddr=" __stringify(LOAD_OFFSET(0000000)) "\0" \
 "cfgaddr=" __stringify(LOAD_OFFSET(0020000)) "\0" \
 "dtbaddr=" __stringify(LOAD_OFFSET(0040000)) "\0" \
@@ -145,7 +118,6 @@ NANDTGTS \
 "b_default=run b_deftgts; for target in ${b_tgts};"\
 " do echo \"### booting ${target} ###\"; run b_${target};" \
 " if test ${b_break} = 1; then; exit; fi; done\0"
-#endif /* !CONFIG_SPL_BUILD*/
 
 #ifdef CONFIG_MTD_RAW_NAND
 /*
@@ -155,14 +127,6 @@ NANDTGTS \
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x8000000
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, \
 					10, 11, 12, 13, 14, 15, 16, 17, \
 					18, 19, 20, 21, 22, 23, 24, 25, \
@@ -179,18 +143,8 @@ NANDTGTS \
 #define CONFIG_NAND_OMAP_GPMC_WSCFG	1
 #endif /* CONFIG_MTD_RAW_NAND */
 
-#if defined(CONFIG_SPI)
-/* SPI Flash */
-/* Environment */
-#elif defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV		1
-#define CONFIG_SYS_MMC_ENV_PART		2
-
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-/* No NAND env support in SPL */
+#if defined(CONFIG_ENV_IS_IN_NAND)
 #define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_ENV_SIZE
-#else
-#error "no storage for Environment defined!"
 #endif
 
 #endif	/* ! __CONFIG_BRPPT1_H__ */