X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fblackvme.h;h=d3dc216c5f052245a3aca1a3fc525b55d5b9626a;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=cd37f9adb9beb0af9caca69927f656951fb6d0ff;hpb=8b485ba12b0defa0c4ed3559789250238f8331a8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h
index cd37f9a..d3dc216 100644
--- a/include/configs/blackvme.h
+++ b/include/configs/blackvme.h
@@ -1,4 +1,4 @@
-/* U-boot for BlackVME. (C) Wojtek Skulski 2010.
+/* U-Boot for BlackVME. (C) Wojtek Skulski 2010.
  * The board includes ADSP-BF561 rev. 0.5,
  * 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG),
  * Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell),
@@ -74,7 +74,6 @@
  */
 #define CONFIG_DRIVER_AX88180	1
 #define AX88180_BASE		0x2c000000
-#define CONFIG_CMD_MII		/* enable probing PHY */
 
 #define CONFIG_HOSTNAME	blackvme	/* Bfin board  */
 #define CONFIG_IPADDR		169.254.144.145	/* Bfin board  */
@@ -83,11 +82,6 @@
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_ROOTPATH		"/export/uClinux-dist/romfs"	/*NFS*/
 #define CFG_AUTOLOAD		"no"
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_ENV_OVERWRITE	1	/* enable changing MAC at runtime */
-/* Comment out hardcoded MAC to enable MAC storage in EEPROM */
-/* # define CONFIG_ETHADDR	ff:ee:dd:cc:bb:aa */
 
 /*
  * SDRAM settings & memory map
@@ -145,8 +139,6 @@
 
 #define CONFIG_ENV_SPI_MAX_HZ	15000000
 #define CONFIG_SF_DEFAULT_SPEED	15000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 
 /*
  * Interactive command settings
@@ -156,19 +148,13 @@
 #define CONFIG_CMDLINE_EDITING	1
 #define CONFIG_AUTO_COMPLETE	1
 
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BOOTLDR
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_CPLBINFO
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_ELF
 
 /*
  * Default: boot from SPI flash.
  * "sfboot" is a composite command defined in extra settings
  */
-#define CONFIG_BOOTDELAY	5
 #define CONFIG_BOOTCOMMAND	"run sfboot"
 
 /*
@@ -177,6 +163,7 @@
 #define CONFIG_BAUDRATE		57600
 #define CONFIG_LOADS_ECHO	1
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BFIN_SERIAL
 
 /*
  * U-Boot environment variables. Use "printenv" to examine.
@@ -225,7 +212,6 @@
  * PF12,13 on SPI connector 0.
  */
 #ifdef CONFIG_SYS_I2C_SOFT
-# define CONFIG_CMD_I2C
 # define CONFIG_SOFT_I2C_GPIO_SCL	GPIO_PF12
 # define CONFIG_SOFT_I2C_GPIO_SDA	GPIO_PF13
 # define CONFIG_SYS_I2C_SPEED		50000
@@ -236,8 +222,6 @@
  * No Parallel Flash on this board
  */
 #define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_FLASH
 
 #endif