X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fblackstamp.h;h=3f5c95917d00f3cb413106bcc25a331ff15c13f2;hb=2ae1824196884ba2bafffb7c0d3e8297350591e9;hp=887f3fb3a348338c445f0f7bb9515ffb3c89e553;hpb=227ad917c5510f595bed29c996a3411b50118959;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 887f3fb..3f5c959 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -24,13 +24,13 @@
 /* CPU Options
  * Be sure to set the Silicon Revision Correctly
  */
-#define CONFIG_BFIN_CPU		bf532-0.5
 #define CONFIG_BFIN_BOOT_MODE	BFIN_BOOT_SPI_MASTER
 
 /*
  * Board settings
  */
-#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x20300300
 
 /* FLASH/ETHERNET uses the same address range
@@ -69,7 +69,7 @@
  * Network settings
  */
 
-#ifdef CONFIG_DRIVER_SMC91111
+#ifdef CONFIG_SMC91111
 #define CONFIG_IPADDR		192.168.0.15
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_GATEWAYIP	192.168.0.1
@@ -108,7 +108,7 @@
 
 #include <config_cmd_default.h>
 
-#ifdef CONFIG_DRIVER_SMC91111
+#ifdef CONFIG_SMC91111
 # define CONFIG_CMD_DHCP
 # define CONFIG_CMD_PING
 #else
@@ -205,32 +205,8 @@
  * them yet. You can (and probably should) change these values!
  */
 #ifdef CONFIG_SOFT_I2C
-
-#define PF_SCL			PF9
-#define PF_SDA			PF8
-
-#define I2C_INIT       do { *pFIO_DIR |= PF_SCL; SSYNC(); } while (0)
-#define I2C_ACTIVE     do { *pFIO_DIR |= PF_SDA; *pFIO_INEN &= ~PF_SDA; SSYNC(); } while (0)
-#define I2C_TRISTATE   do { *pFIO_DIR &= ~PF_SDA; *pFIO_INEN |= PF_SDA; SSYNC(); } while (0)
-#define I2C_READ       ((*pFIO_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-	do { \
-		if (bit) \
-			*pFIO_FLAG_S = PF_SDA; \
-		else \
-			*pFIO_FLAG_C = PF_SDA; \
-		SSYNC(); \
-	} while (0)
-#define I2C_SCL(bit) \
-	do { \
-		if (bit) \
-			*pFIO_FLAG_S = PF_SCL; \
-		else \
-			*pFIO_FLAG_C = PF_SCL; \
-		SSYNC(); \
-	} while (0)
-#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
 #define CONFIG_SYS_I2C_SPEED		50000
 #define CONFIG_SYS_I2C_SLAVE		0xFE
 #endif