X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbk4r1.h;h=05ebb7d9c5cf44a9bcc52275ca5221de6c42a6eb;hb=4862830b696a6d0750e19d32a82553cdb41a85f8;hp=a012705870f782446fd4cb5b06bab705714b9b27;hpb=e8f80a5a58c9b506453cc0780687e8ed457d30a6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h
index a012705..05ebb7d 100644
--- a/include/configs/bk4r1.h
+++ b/include/configs/bk4r1.h
@@ -1,24 +1,271 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright (C) 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
  * Copyright 2016 3ADEV <http://3adev.com>
  * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
  *
- * Configuration settings for the phytec PCM-052 SoM-based BK4R1.
+ * Configuration settings for BK4R1.
  */
 
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
 /* Define the BK4r1-specific env commands */
-#define PCM052_EXTRA_ENV_SETTINGS \
+#define BK4_EXTRA_ENV_SETTINGS \
+	"bootlimit=3\0" \
+	"eraseuserdata=false\0" \
+	"altbootcmd=led 5 on; " \
+		"boot\0" \
 	"set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \
-	"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"
+	"set_gpio102=mw 0x400ff0c4 0x40; mw 0x40048198 0x000011bf\0" \
+	"set_gpio96=mw 0x40048180 0x282; mw 0x400ff0c4 0x1\0"\
+	"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"\
+	"set_gpio6=mw 0x40048018 0x282; mw 0x400ff008 0x40\0"\
+	"manage_userdata=" MANAGE_USERDATA "\0"\
+	"ncenable=true\0"\
+	"ncserverip=192.168.0.77\0"\
+	"if_netconsole=ping $ncserverip\0"\
+	"start_netconsole=setenv ncip $serverip; setenv bootdelay 10;" \
+	     "setenv stdin nc; setenv stdout nc; setenv stderr nc; version;\0" \
+	"preboot=" BK4_NET_INIT \
+		"if ${ncenable}; then run if_netconsole start_netconsole; fi\0"
 
 /* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/
-#define PCM052_BOOTCOMMAND "run set_gpio103; sf probe; "
+#define BK4_BOOTCOMMAND "run set_gpio122; run set_gpio96; sf probe; " \
+			"run manage_userdata; "
+
+/* Enable PREBOOT variable */
+#define CONFIG_PREBOOT
+
+/* Set ARP_TIMEOUT to 500ms */
+#define CONFIG_ARP_TIMEOUT 500UL
+
+/* Set ARP_TIMEOUT_COUNT to 3 repetitions */
+#define CONFIG_NET_RETRY_COUNT	5
 
 /* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
-#define PCM052_NET_INIT "run set_gpio122; "
+#define BK4_NET_INIT "run set_gpio122;"
+
+/* Check if userdata volume shall be erased */
+#define MANAGE_USERDATA "if ${eraseuserdata}; " \
+						"then ubi part system; " \
+						"ubi remove userdata; " \
+						"ubi create userdata; " \
+						"ubi detach; " \
+						"setenv eraseuserdata false; " \
+						"saveenv; " \
+						"fi; "
+
+/* Autoboot options */
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT	\
+	"Enter passphrase to stop autoboot, booting in %d seconds\n"
+#define CONFIG_AUTOBOOT_STOP_STR "123"
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* Enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 4 * SZ_1M)
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* NAND support */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+#define IMX_FEC1_BASE			ENET1_BASE_ADDR
+
+/* QSPI Configs*/
+#ifdef CONFIG_FSL_QSPI
+#define FSL_QSPI_FLASH_SIZE		(SZ_16M)
+#define FSL_QSPI_FLASH_NUM		2
+#define CONFIG_SYS_FSL_QSPI_LE
+#endif
+
+#define CONFIG_LOADADDR	0x82000000
+
+/* We boot from the gfxRAM area of the OCRAM. */
+#define CONFIG_BOARD_SIZE_LIMIT		520192
+
+/* boot command, including the target-defined one if any */
+#define CONFIG_BOOTCOMMAND	BK4_BOOTCOMMAND "run bootcmd_nand"
+
+/* Extra env settings (including the target-defined ones if any) */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	BK4_EXTRA_ENV_SETTINGS \
+	"autoload=no\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"blimg_file=u-boot.vyb\0" \
+	"blimg_addr=0x81000000\0" \
+	"dtbkernel_file=fitImage\0" \
+	"dtbkernel_addr=0x82000000\0" \
+	"ram_file=uRamdisk\0" \
+	"ram_addr=0x83000000\0" \
+	"filesys=rootfs.ubifs\0" \
+	"sys_addr=0x81000000\0" \
+	"nfs_root=/path/to/nfs/root\0" \
+	"tftptimeout=1000\0" \
+	"tftptimeoutcountmax=1000000\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	"ipaddr=192.168.0.60\0" \
+	"serverip=192.168.0.1\0" \
+	"bootargs_base=setenv bootargs rw " \
+	"console=ttyLP1,115200n8\0" \
+	"bootargs_sd=setenv bootargs ${bootargs} " \
+		"root=/dev/mmcblk0p2 rootwait\0" \
+	"bootargs_nand=setenv bootargs ${bootargs} " \
+		"ubi.mtd=5 rootfstype=" \
+				"ubifs root=ubi0:rootfs${active_workset}\0" \
+	"bootargs_ram=setenv bootargs ${bootargs} " \
+		"root=/dev/ram rw initrd=${ram_addr}\0" \
+	"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+	"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
+		"fatload mmc 0:2 ${dtbkernel_addr} ${dtbkernel_file}; " \
+		"bootm ${dtbkernel_addr}\0" \
+	"bootcmd_nand=sf probe;run bootargs_base bootargs_nand bootargs_mtd; " \
+		"ubi part dtbkernel; " \
+		"ubi readvol ${dtbkernel_addr} dtbkernel${active_workset}; " \
+		"led 0 on; " \
+		"bootm ${dtbkernel_addr}\0" \
+	"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
+		"nand read ${fdt_addr} dtb; " \
+		"nand read ${kernel_addr} kernel; " \
+		"nand read ${ram_addr} root; " \
+		"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
+	"update_bootloader_from_sd=if fatload mmc 0:2 ${blimg_addr} " \
+		"${blimg_file}; " \
+		"then sf probe; " \
+		"mtdparts default; " \
+		"nand erase.part bootloader; " \
+		"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
+	"update_bootloader_from_tftp=if tftp ${blimg_addr} "\
+		"${tftpdir}${blimg_file}; "\
+		"then sf probe; " \
+		"mtdparts default; " \
+		"nand erase.part bootloader; " \
+		"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
+	"update_dtbkernel_from_sd=if fatload mmc 0:2 ${dtbkernel_addr} " \
+		"${dtbkernel_file}; " \
+		"then sf probe; " \
+		"ubi part dtbkernel; " \
+		"ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \
+		"${filesize}; " \
+		"ubi detach; fi\0" \
+	"update_dtbkernel_from_tftp=if tftp ${dtbkernel_addr} " \
+		"${tftpdir}${dtbkernel_file}; " \
+		"then sf probe; " \
+		"ubi part dtbkernel; " \
+		"ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \
+		"${filesize}; " \
+		"ubi detach; fi\0" \
+	"update_ramdisk_from_sd=if fatload mmc 0:2 ${ram_addr} " \
+		"${ram_file}; " \
+		"then sf probe; " \
+		"mtdparts default; " \
+		"nand erase.part initrd; " \
+		"nand write ${ram_addr} initrd ${filesize}; fi\0" \
+	"update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
+		"then sf probe; " \
+		"nand erase.part initrd; " \
+		"nand write ${ram_addr} initrd ${filesize}; fi\0" \
+	"update_rootfs_from_sd=if fatload mmc 0:2 ${sys_addr} " \
+		"${filesys}; " \
+		"then sf probe; " \
+		"ubi part system; " \
+		"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
+		"ubi detach; fi\0" \
+	"update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \
+		"then sf probe; " \
+		"ubi part system; " \
+		"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
+		"ubi detach; fi\0" \
+	"setup_dtbkernel=nand erase.part dtbkernel; " \
+		"ubi part dtbkernel; " \
+		"ubi create dtbkernel1 972000 s; " \
+		"ubi create dtbkernel2 972000 s; " \
+		"ubi detach\0" \
+	"setup_system=nand erase.part system; " \
+		"ubi part system; " \
+		"ubi create rootfs1 15E15000 d; " \
+		"ubi create rootfs2 15E15000 d; " \
+		"ubi create userdata; " \
+		"ubi detach\0" \
+	"setup_nor1=" BK4_NET_INIT \
+		"if tftp ${sys_addr} ${tftpdir}ubinor1.img; " \
+		"then sf probe 0:0; " \
+		"sf erase 0 01000000; " \
+		"mtdparts default; " \
+		"ubi part nor; " \
+		"ubi create nor1fs; " \
+		"ubi write ${sys_addr} nor1fs ${filesize}; " \
+		"ubi detach; fi\0" \
+	"setup_nor2=" BK4_NET_INIT \
+		"if tftp ${sys_addr} ${tftpdir}ubinor2.img; " \
+		"then sf probe 0:1; " \
+		"sf erase 0 01000000; " \
+		"mtdparts default; " \
+		"ubi part nor; " \
+		"ubi create nor2fs; " \
+		"ubi write ${sys_addr} nor2fs ${filesize}; " \
+		"ubi detach; fi\0" \
+	"prepare_install_bk4r1_envs=" \
+		"echo 'Preparing envs for SD card recovery!';" \
+		"setenv ipaddr 192.168.0.99;" \
+		"setenv serverip 192.168.0.50;" \
+		"\0" \
+	"install_bk4r1rs="\
+		"led 0 on; " \
+		"nand erase.chip; mtdparts default; "\
+		"led 1 on; "\
+		"run setup_dtbkernel; " \
+		"run setup_system; " \
+		"led 2 on;" \
+		"run update_bootloader_from_sd; "\
+		"run update_dtbkernel_from_sd; "\
+		"run update_rootfs_from_sd; "\
+		"setenv bootcmd 'run bootcmd_nand'; "\
+		"saveenv; " \
+		"led 3 on; " \
+		"echo Finished - Please Power off, REMOVE SDCARD and set boot" \
+			"source to NAND\0" \
+	"active_workset=1\0"
+
+/* Miscellaneous configurable options */
+
+#define CONFIG_SYS_MEMTEST_START	0x80010000
+#define CONFIG_SYS_MEMTEST_END		0x87C00000
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+/* Physical memory map */
+#define PHYS_SDRAM			(0x80000000)
+#define PHYS_SDRAM_SIZE		(SZ_512M)
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-/* add NOR to MTD env */
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* now include standard PCM052 config */
+#ifdef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE	(SZ_128K)
+#define CONFIG_ENV_SIZE		(SZ_8K)
+#define CONFIG_ENV_OFFSET	0x200000
+#define CONFIG_ENV_SIZE_REDUND	(SZ_8K)
+#define CONFIG_ENV_OFFSET_REDUND	0x220000
+#endif
 
-#include "configs/pcm052.h"
+#endif /* __CONFIG_H */