X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf561-ezkit.h;h=641548dafdaa9bff8659fc48caedb784e43d2c84;hb=cfd60441d8360cb9ffa315ecf3a2aef9bc134905;hp=29662604f99266e7d2d5847501619ffd5da22ac8;hpb=b706d63559aeec352bc72dd86d7d5423c15f6a60;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 2966260..641548d 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -5,8 +5,7 @@
 #ifndef __CONFIG_EZKIT561_H__
 #define __CONFIG_EZKIT561_H__
 
-#define CONFIG_VDSP		1
-#define CONFIG_BF561		1
+#include <asm/blackfin-config-pre.h>
 
 #define CFG_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
@@ -18,29 +17,13 @@
 
 #define CONFIG_PANIC_HANG 1
 
-/*
-* Boot Mode Set
-* Blackfin can support several boot modes
-*/
-#define BF561_BYPASS_BOOT	0x21
-#define BF561_PARA_BOOT		0x22
-#define BF561_SPI_BOOT		0x24
-/* Define the boot mode */
-#define BFIN_BOOT_MODE	BF561_BYPASS_BOOT
+#define CONFIG_BFIN_CPU	bf561-0.3
+#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
 
 /* This sets the default state of the cache on U-Boot's boot */
 #define CONFIG_ICACHE_ON
 #define CONFIG_DCACHE_ON
 
-/* Define where the uboot will be loaded by on-chip boot rom */
-#define APP_ENTRY 0x00001000
-
-/*
- * Stringize definitions - needed for environmental settings
- */
-#define STRINGIZE2(x) #x
-#define STRINGIZE(x) STRINGIZE2(x)
-
 /*
  * Board settings
  */
@@ -216,7 +199,7 @@
  */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_PROMPT		"ezkit> "	/* Monitor Command Prompt */
+#define	CFG_PROMPT		"bfin> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024		/* Console I/O Buffer Size */
@@ -238,17 +221,14 @@
 /*
  * FLASH organization and environment definitions
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_EBIU_SDRRC_VAL  0x306
+#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
+#define CONFIG_EBIU_SDBCTL_VAL 0x15
 
-#define AMGCTLVAL		0x3F
-#define AMBCTL0VAL		0x7BB07BB0
-#define AMBCTL1VAL		0xFFC27BB0
+#define CONFIG_EBIU_AMGCTL_VAL		0x3F
+#define CONFIG_EBIU_AMBCTL0_VAL		0x7BB07BB0
+#define CONFIG_EBIU_AMBCTL1_VAL		0xFFC27BB0
 
-#ifdef CONFIG_VDSP
-#define ET_EXEC_VDSP		0x8
-#define SHT_STRTAB_VDSP		0x1
-#define ELFSHDRSIZE_VDSP	0x2C
-#define VDSP_ENTRY_ADDR		0xFFA00000
-#endif
+#include <asm/blackfin-config-post.h>
 
 #endif				/* __CONFIG_EZKIT561_H__ */