X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf548-ezkit.h;h=811dae8ea46c8eb4060633ea72bd9386b130875b;hb=12f05678e157ef4472b4e3611bb7ae9751487ff0;hp=3550fd33084c6c4bda096387e5500fc3d8c1eb4a;hpb=1b48f126d640d1262d53553bbc68a689b87564eb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index 3550fd3..811dae8 100644
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF548 STAMP board
+ * U-Boot - Configuration file for BF548 STAMP board
  */
 
 #ifndef __CONFIG_BF548_EZKIT_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf548-0.0
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +36,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
-
 /*
  * Memory Settings
  */
@@ -64,19 +61,14 @@
 #define CONFIG_SYS_MONITOR_LEN	(1024 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(768 * 1024)
 
-
 /*
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X	1
 #define CONFIG_SMC911X_BASE	0x24000000
 #define CONFIG_SMC911X_16_BIT
 #define CONFIG_HOSTNAME		bf548-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -88,16 +80,12 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	259
 
-
 /*
  * SPI Settings
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-
 
 /*
  * Env Storage Settings
@@ -121,26 +109,22 @@
 #define CONFIG_ENV_SECT_SIZE	0x8000
 #endif
 
-
 /*
  * NAND Settings
  */
-#define CONFIG_BFIN_NFC_CTL_VAL	0x0033
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
-# define CONFIG_BFIN_NFC_BOOTROM_ECC
-#endif
+#define CONFIG_BFIN_NFC_CTL_VAL        0x0033
+#define CONFIG_BFIN_NFC_BOOTROM_ECC
 #define CONFIG_DRIVER_NAND_BFIN
-#define CONFIG_SYS_NAND_BASE		0 /* not actually used */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
-
+#define CONFIG_SYS_NAND_BASE           0 /* not actually used */
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#endif
 
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 /*
  * SATA
@@ -154,7 +138,6 @@
 #define CONFIG_BFIN_ATA_MODE	XFER_PIO_4
 #endif
 
-
 /*
  * SDH Settings
  */
@@ -164,19 +147,15 @@
 #define CONFIG_BFIN_SDH
 #endif
 
-
 /*
  * USB Settings
  */
 #if !defined(__ADSPBF544__)
-#define CONFIG_USB
-#define CONFIG_MUSB_HCD
+#define CONFIG_USB_MUSB_HCD
 #define CONFIG_USB_BLACKFIN
-#define CONFIG_USB_STORAGE
-#define CONFIG_MUSB_TIMEOUT 100000
+#define CONFIG_USB_MUSB_TIMEOUT 100000
 #endif
 
-
 /*
  * Misc Settings
  */
@@ -186,22 +165,27 @@
 #define CONFIG_UART_CONSOLE	1
 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000
 
-#ifndef __ADSPBF542__
-/* Don't waste time transferring a logo over the UART */
-# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-#  define CONFIG_VIDEO
-# endif
-# define CONFIG_DEB_DMA_URGENT
+#define CONFIG_ADI_GPIO2
+
+#undef CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h >
+#define CONFIG_DEB_DMA_URGENT
 #endif
 
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK 11       /* Should > = 11 */
-#define FLASH_END_POST_BLOCK   71       /* Should < = 71 */
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+	GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+	GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+	13, 12, 11, 10,
+#define CONFIG_SYS_POST_FLASH_START	10
+#define CONFIG_SYS_POST_FLASH_END	127
 #endif
 
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */