X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf537-stamp.h;h=6d438395933266725d69eda9cd9abab3094bd514;hb=bb1f8b4f8bb0bfce52e0faa4637b975b745824b3;hp=b9a9e3cb79203294f9320bc4cc920be7a20d8353;hpb=b8685affe614ccf5f4ec66252b30e2e524d18948;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index b9a9e3c..6d43839 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -5,36 +5,23 @@ #ifndef __CONFIG_BF537_H__ #define __CONFIG_BF537_H__ +#include + #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_BAUDRATE 57600 /* Set default serial console for bf537 */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_BF537 1 #define CONFIG_BOOTDELAY 5 /* define CONFIG_BF537_STAMP_LEDCMD to enable LED command*/ /*#define CONFIG_BF537_STAMP_LEDCMD 1*/ -/* - * Boot Mode Set - * Blackfin can support several boot modes - */ -#define BF537_BYPASS_BOOT 0x0011 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ -#define BF537_PARA_BOOT 0x0012 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ -#define BF537_SPI_MASTER_BOOT 0x0014 /* Bootmode 3: SPI master mode boot from SPI flash */ -#define BF537_SPI_SLAVE_BOOT 0x0015 /* Bootmode 4: SPI slave mode boot from SPI flash */ -#define BF537_TWI_MASTER_BOOT 0x0016 /* Bootmode 5: TWI master mode boot from EEPROM */ -#define BF537_TWI_SLAVE_BOOT 0x0017 /* Bootmode 6: TWI slave mode boot from EEPROM */ -#define BF537_UART_BOOT 0x0018 /* Bootmode 7: UART slave mdoe boot via UART host */ -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF537_BYPASS_BOOT - #define CONFIG_PANIC_HANG 1 -#define ADSP_BF534 0x34 -#define ADSP_BF536 0x36 -#define ADSP_BF537 0x37 -#define BFIN_CPU ADSP_BF537 +#define CONFIG_BFIN_CPU bf537-0.2 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS + +#define CONFIG_BFIN_MAC /* This sets the default state of the cache on U-Boot's boot */ #define CONFIG_ICACHE_ON @@ -43,9 +30,6 @@ /* Define if want to do post memory test */ #undef CONFIG_POST_TEST -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - #define CONFIG_RTC_BFIN 1 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ @@ -70,9 +54,7 @@ /* Values can range from 2-65535 */ /* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ #define CONFIG_SPI_BAUD 2 -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) #define CONFIG_SPI_BAUD_INITBLOCK 4 -#endif #if ( CONFIG_CLKIN_HALF == 0 ) #define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) @@ -88,14 +70,6 @@ #define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ #endif -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) -#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ -#else -#undef CONFIG_SPI_FLASH_FAST_READ -#endif -#endif - #define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ #define CONFIG_MEM_ADD_WDTH 10 /* 8, 9, 10, 11 */ #define CONFIG_MEM_MT48LC32M8A2_75 1 @@ -113,7 +87,7 @@ * Network Settings */ /* network support */ -#if (BFIN_CPU != ADSP_BF534) +#ifdef CONFIG_BFIN_MAC #define CONFIG_IPADDR 192.168.0.15 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_GATEWAYIP 192.168.0.1 @@ -129,11 +103,11 @@ #define CFG_LONGHELP 1 #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_BOOTCOMMAND "run ramboot" -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) && defined(CONFIG_POST_TEST) +#if defined(CONFIG_POST_TEST) /* POST support */ -#define CONFIG_POST ( CFG_POST_MEMORY | \ +#define CONFIG_POST ( CFG_POST_MEMORY | \ CFG_POST_UART | \ CFG_POST_FLASH | \ CFG_POST_ETHER | \ @@ -177,8 +151,6 @@ */ #include -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) - #define CONFIG_CMD_ELF #define CONFIG_CMD_I2C #define CONFIG_CMD_CACHE @@ -186,7 +158,7 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_DATE -#if (BFIN_CPU == ADSP_BF534) +#ifndef CONFIG_BFIN_MAC #undef CONFIG_CMD_NET #else #define CONFIG_CMD_PING @@ -198,10 +170,6 @@ #define CONFIG_CMD_IDE #endif -#endif - -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) - #define CONFIG_CMD_DHCP #if defined(CONFIG_POST) @@ -212,14 +180,10 @@ #define CONFIG_CMD_NAND #endif -#endif - #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" #define CONFIG_LOADADDR 0x1000000 -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) -#if (BFIN_CPU != ADSP_BF534) #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -236,61 +200,15 @@ "protect off 0x20000000 0x2007FFFF;" \ "erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0" \ "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - "" -#endif -#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#if (BFIN_CPU != ADSP_BF534) -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):eth0:off\0" \ - "ramboot=tftpboot $(loadaddr) linux;" \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot $(loadaddr) linux;" \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "update=tftpboot $(loadaddr) u-boot.ldr;" \ - "eeprom write $(loadaddr) 0x0 $(filesize);\0" \ - "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - "" -#endif -#endif -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#if (BFIN_CPU == ADSP_BF534) -#define CFG_PROMPT "serial_bf534> " /* Monitor Command Prompt */ -#elif (BFIN_CPU == ADSP_BF536) -#define CFG_PROMPT "serial_bf536> " /* Monitor Command Prompt */ -#else -#define CFG_PROMPT "serial_bf537> " /* Monitor Command Prompt */ -#endif -#else -#if (BFIN_CPU == ADSP_BF534) -#define CFG_PROMPT "bf534> " /* Monitor Command Prompt */ -#elif (BFIN_CPU == ADSP_BF536) -#define CFG_PROMPT "bf536> " /* Monitor Command Prompt */ -#else -#define CFG_PROMPT "bf537> " /* Monitor Command Prompt */ -#endif -#endif +#define CFG_PROMPT "bfin> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024*1024) +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024*1024) #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ @@ -302,6 +220,11 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0x20000000 +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_PROTECTION +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 71 /* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */ #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) @@ -311,25 +234,18 @@ #define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) #define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ - -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_UART_BOOT) -/* for bf537-stamp, usrt boot mode still store env in flash */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */ +#else #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR 0x20004000 #define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) -#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0x4000 -#define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */ #endif #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ -/* #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) */ #define ENV_IS_EMBEDDED -/* #endif */ /* JFFS Partition offset set */ #define CFG_JFFS2_FIRST_BANK 0 @@ -365,10 +281,10 @@ #define NAND_MAX_CHIPS 1 #define BFIN_NAND_READY PF3 -#define NAND_WAIT_READY(nand) \ - do { \ - int timeout = 0; \ - while(!(*pPORTFIO & PF3)) \ +#define NAND_WAIT_READY(nand) \ + do { \ + int timeout = 0; \ + while(!(*pPORTFIO & PF3)) \ if (timeout++ > 100000) \ break; \ } while (0) @@ -398,6 +314,14 @@ #define CONFIG_TWICLK_KHZ 50 #endif +#define CONFIG_EBIU_SDRRC_VAL 0x306 +#define CONFIG_EBIU_SDGCTL_VAL 0x91114d +#define CONFIG_EBIU_SDBCTL_VAL 0x25 + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 +#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 + #if defined CONFIG_SOFT_I2C /* * Software (bit-bang) I2C driver configuration @@ -443,15 +367,6 @@ #define AMBCTL0VAL 0x7BB07BB0 #define AMBCTL1VAL 0xFFC27BB0 -#define CONFIG_VDSP 1 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif - #if defined(CONFIG_BFIN_IDE) #define CONFIG_DOS_PARTITION 1 @@ -507,4 +422,6 @@ #endif /*CONFIG_BFIN_IDE */ +#include + #endif