X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf537-pnav.h;h=bced1df12c789c4ba72f97ee6b2f3e4056495834;hb=12f05678e157ef4472b4e3611bb7ae9751487ff0;hp=0913ce4e6916593e4d3286ea0c573cb3f79d6c5d;hpb=880c80d004acdc7370ab892df51c37c0cf0ff86d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h
index 0913ce4..bced1df 100644
--- a/include/configs/bf537-pnav.h
+++ b/include/configs/bf537-pnav.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF537 PNAV board
+ * U-Boot - Configuration file for BF537 PNAV board
  */
 
 #ifndef __CONFIG_BF537_PNAV_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf537-0.2
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_SPI_MASTER
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +36,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
-
 /*
  * Memory Settings
  */
@@ -55,7 +52,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 
-
 /*
  * Network Settings
  */
@@ -63,12 +59,8 @@
 #define ADI_CMDS_NETWORK	1
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI	1
 #endif
 #define CONFIG_HOSTNAME		bf537-pnav
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:24:21:18 */
-
 
 /*
  * Flash Settings
@@ -79,16 +71,12 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	71
 
-
 /*
  * SPI Settings
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-
 
 /*
  * Env Storage Settings
@@ -112,13 +100,12 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	arch/blackfin/lib/libblackfin.o (.text*); \
-	arch/blackfin/cpu/libblackfin.o (.text*); \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
 	common/env_embedded.o (.text*);
 #endif
 
-
 /*
  * NAND Settings
  */
@@ -139,19 +126,16 @@
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
 #define NAND_PLAT_GPIO_DEV_READY       GPIO_PF12
 
-
 /*
  * I2C settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 /*
  * Misc Settings
  */
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
 
@@ -164,7 +148,6 @@
 #define CONFIG_BOOTCOMMAND	"run nandboot"
 #define CONFIG_BOOTARGS_ROOT	"/dev/mtdblock1 rw rootfstype=yaffs"
 
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */