X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf537-pnav.h;h=730ae279b6c183e6565a32afe1259dca03ee4d4c;hb=2ae1824196884ba2bafffb7c0d3e8297350591e9;hp=6627a04f59ca4a9b9f1e6adcf851fea94533002a;hpb=a7709d926dbc7cb1541034fcf2b21ce3e838cb12;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h
index 6627a04..730ae27 100644
--- a/include/configs/bf537-pnav.h
+++ b/include/configs/bf537-pnav.h
@@ -11,7 +11,6 @@
 /*
  * Processor Settings
  */
-#define CONFIG_BFIN_CPU             bf537-0.2
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_SPI_MASTER
 
 
@@ -52,7 +51,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	0x7BB033B0
 #define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
 
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 
 
@@ -112,11 +111,11 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	cpu/blackfin/traps.o		(.text .text.*); \
-	cpu/blackfin/interrupt.o	(.text .text.*); \
-	cpu/blackfin/serial.o		(.text .text.*); \
+	arch/blackfin/cpu/traps.o		(.text .text.*); \
+	arch/blackfin/cpu/interrupt.o	(.text .text.*); \
+	arch/blackfin/cpu/serial.o		(.text .text.*); \
 	common/dlmalloc.o		(.text .text.*); \
-	lib_generic/crc32.o		(.text .text.*); \
+	lib/crc32.o		(.text .text.*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
 	common/env_embedded.o		(.text .text.*);
 #endif
@@ -132,7 +131,6 @@
 
 #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
 #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
-#define BFIN_NAND_READY     PF12
 #define BFIN_NAND_WRITE(addr, cmd) \
 	do { \
 		bfin_write8(addr, cmd); \
@@ -141,13 +139,7 @@
 
 #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip)      (bfin_read_PORTHIO() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
-	do { \
-		bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~BFIN_NAND_READY); \
-		bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() & ~BFIN_NAND_READY); \
-		bfin_write_PORTHIO_INEN(bfin_read_PORTHIO_INEN() | BFIN_NAND_READY); \
-	} while (0)
+#define NAND_PLAT_GPIO_DEV_READY       GPIO_PF12
 
 
 /*
@@ -155,8 +147,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0
 
 
 /*