X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf533-stamp.h;h=e3344e9e85166e52b9be5f5d3e2a47c609f33b87;hb=31a4f1e5b6ee9b6335f0313dce7637cef887f84f;hp=083c030179859dd91cfd1d085af6ceb1375013c3;hpb=3e3989619f5ed3ee28002d985f3da28540586ab9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 083c030..e3344e9 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -60,7 +60,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x20300300
 #define SMC91111_EEPROM_INIT() \
@@ -93,10 +92,7 @@
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
 #define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_ALL
 
 
 /*
@@ -126,63 +122,19 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	cpu/blackfin/traps.o		(.text .text.*); \
-	cpu/blackfin/interrupt.o	(.text .text.*); \
-	cpu/blackfin/serial.o		(.text .text.*); \
-	common/dlmalloc.o		(.text .text.*); \
-	lib_generic/crc32.o		(.text .text.*); \
+	arch/blackfin/lib/libblackfin.o (.text*); \
+	arch/blackfin/cpu/libblackfin.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o		(.text .text.*);
+	common/env_embedded.o (.text*);
 #endif
 
 
 /*
  * I2C Settings
- * By default PF2 is used as SDA and PF3 as SCL on the Stamp board
  */
 #define CONFIG_SOFT_I2C
-#ifdef CONFIG_SOFT_I2C
-#define PF_SCL PF3
-#define PF_SDA PF2
-#define I2C_INIT \
-	do { \
-		*pFIO_DIR |= PF_SCL; \
-		SSYNC(); \
-	} while (0)
-#define I2C_ACTIVE \
-	do { \
-		*pFIO_DIR |= PF_SDA; \
-		*pFIO_INEN &= ~PF_SDA; \
-		SSYNC(); \
-	} while (0)
-#define I2C_TRISTATE \
-	do { \
-		*pFIO_DIR &= ~PF_SDA; \
-		*pFIO_INEN |= PF_SDA; \
-		SSYNC(); \
-	} while (0)
-#define I2C_READ ((*pFIO_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-	do { \
-		if (bit) \
-			*pFIO_FLAG_S = PF_SDA; \
-		else \
-			*pFIO_FLAG_C = PF_SDA; \
-		SSYNC(); \
-	} while (0)
-#define I2C_SCL(bit) \
-	do { \
-		if (bit) \
-			*pFIO_FLAG_S = PF_SCL; \
-		else \
-			*pFIO_FLAG_C = PF_SCL; \
-		SSYNC(); \
-	} while (0)
-#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0
-#endif
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
 
 
 /*
@@ -230,23 +182,19 @@
 /* define to enable run status via led */
 /* #define CONFIG_STATUS_LED */
 #ifdef CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
 #define CONFIG_BOARD_SPECIFIC_LED
-#ifndef __ASSEMBLY__
-typedef unsigned int led_id_t;
-void __led_init(led_id_t mask, int state);
-void __led_set(led_id_t mask, int state);
-void __led_toggle(led_id_t mask);
-#endif
-/* use LED1 to indicate booting/alive */
+/* use LED0 to indicate booting/alive */
 #define STATUS_LED_BOOT 0
-#define STATUS_LED_BIT 1
+#define STATUS_LED_BIT GPIO_PF2
 #define STATUS_LED_STATE STATUS_LED_ON
 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
-/* use LED2 to indicate crash */
+/* use LED1 to indicate crash */
 #define STATUS_LED_CRASH 1
-#define STATUS_LED_BIT1 2
+#define STATUS_LED_BIT1 GPIO_PF3
 #define STATUS_LED_STATE1 STATUS_LED_ON
 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+/* #define STATUS_LED_BIT2 GPIO_PF4 */
 #endif
 
 /* define to enable splash screen support */