X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf533-stamp.h;h=afb3ef605db6bf839de071c50806e027fd3f2000;hb=2d8d190c8394b43c0989cdb04a50cb48d4e1f8da;hp=7144c6319fe9909a6b929d22d91b39dfcb30461d;hpb=230187ce266889ad465b39ded6717805379e7ffe;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 7144c63..afb3ef6 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF533 STAMP board
+ * U-Boot - Configuration file for BF533 STAMP board
  */
 
 #ifndef __CONFIG_BF533_STAMP_H__
@@ -7,7 +7,6 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
@@ -53,7 +52,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(384 * 1024)
 
-
 /*
  * Network Settings
  */
@@ -68,9 +66,6 @@
 		SSYNC(); \
 	} while (0)
 #define CONFIG_HOSTNAME		bf533-stamp
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:b8 */
-
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -80,33 +75,8 @@
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#define PF_SCL			PF3
-#define PF_SDA			PF2
-#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
-#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); \
-				*pFIO_INEN &= ~PF_SDA; asm("ssync;")
-#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); \
-				*pFIO_INEN |= PF_SDA; asm("ssync;")
-#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); \
-				asm("ssync;")
-#define I2C_SDA(bit)	if (bit) { \
-				*pFIO_FLAG_S = PF_SDA; \
-				asm("ssync;"); \
-				} \
-			else	{ \
-				*pFIO_FLAG_C = PF_SDA; \
-				asm("ssync;"); \
-				}
-#define I2C_SCL(bit)	if (bit) { \
-				*pFIO_FLAG_S = PF_SCL; \
-				asm("ssync;"); \
-				} \
-			else	{ \
-				*pFIO_FLAG_C = PF_SCL; \
-				asm("ssync;"); \
-				}
-#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-
+#define CONFIG_SOFT_I2C_GPIO_SCL	GPIO_PF3
+#define CONFIG_SOFT_I2C_GPIO_SDA	GPIO_PF2
 
 /*
  * Flash Settings
@@ -123,10 +93,10 @@
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
+/*
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_ALL
-
+*/
 
 /*
  * Env Storage Settings
@@ -155,13 +125,12 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	arch/blackfin/lib/libblackfin.o (.text*); \
-	arch/blackfin/cpu/libblackfin.o (.text*); \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
 	common/env_embedded.o (.text*);
 #endif
 
-
 /*
  * I2C Settings
  */
@@ -204,7 +173,6 @@
 #define CONFIG_EBIU_AMBCTL1_VAL	0x99B3ffc2
 #endif
 
-
 /*
  * Misc Settings
  */
@@ -218,26 +186,8 @@
 /* #define CONFIG_SHOW_BOOT_PROGRESS */
 
 /* define to enable run status via led */
-/* #define CONFIG_STATUS_LED */
-#ifdef CONFIG_STATUS_LED
-#define CONFIG_GPIO_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-/* use LED0 to indicate booting/alive */
-#define STATUS_LED_BOOT 0
-#define STATUS_LED_BIT GPIO_PF2
-#define STATUS_LED_STATE STATUS_LED_ON
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
-/* use LED1 to indicate crash */
-#define STATUS_LED_CRASH 1
-#define STATUS_LED_BIT1 GPIO_PF3
-#define STATUS_LED_STATE1 STATUS_LED_ON
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
-/* #define STATUS_LED_BIT2 GPIO_PF4 */
-#endif
 
 /* define to enable splash screen support */
-/* #define CONFIG_VIDEO */
-
 
 /*
  * Pull in common ADI header for remaining command/environment setup