X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf527-ezkit.h;h=d945b8d7bfc0ca14ab15351c0717627c3d589c42;hb=529fb062081e100faae6dc0d163a548b8528ff24;hp=fa9053b618596f9ee75317083eabf0c6027eb3fe;hpb=d24f2d321d8e78e990d100000d8efc4845c78b1c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h
index fa9053b..d945b8d 100644
--- a/include/configs/bf527-ezkit.h
+++ b/include/configs/bf527-ezkit.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF537 STAMP board
+ * U-Boot - Configuration file for BF537 STAMP board
  */
 
 #ifndef __CONFIG_BF527_EZKIT_H__
@@ -7,13 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
+#define CONFIG_BFIN_CPU             bf527-0.0
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -37,7 +36,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
-
 /*
  * Memory Settings
  */
@@ -54,7 +52,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(640 * 1024)
 
-
 /*
  * NAND Settings
  * (can't be used same time as ethernet)
@@ -68,10 +65,8 @@
 #define CONFIG_DRIVER_NAND_BFIN
 #define CONFIG_SYS_NAND_BASE		0 /* not actually used */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
 #endif
 
-
 /*
  * Network Settings
  */
@@ -81,12 +76,8 @@
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
 #define CONFIG_NETCONSOLE	1
-#define CONFIG_NET_MULTI	1
 #endif
 #define CONFIG_HOSTNAME		bf527-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -98,16 +89,12 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	259
 
-
 /*
  * SPI Settings
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-
 
 /*
  * Env Storage Settings
@@ -131,34 +118,41 @@
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 
-
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 /*
  * USB Settings
  */
 #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
-#define CONFIG_USB
-#define CONFIG_MUSB_HCD
+#define CONFIG_USB_MUSB_HCD
 #define CONFIG_USB_BLACKFIN
-#define CONFIG_USB_STORAGE
-#define CONFIG_MUSB_TIMEOUT 100000
+#define CONFIG_USB_MUSB_TIMEOUT 100000
 #endif
 
+/* Don't waste time transferring a logo over the UART */
 
 /*
  * Video Settings
  */
+#ifdef CONFIG_VIDEO
 #ifdef CONFIG_BF527_EZKIT_REV_2_1
 # define CONFIG_LQ035Q1_SPI_BUS	0
 # define CONFIG_LQ035Q1_SPI_CS	7
+# define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
+#else
+# define CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI
 #endif
 
+#ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
+# define EASYLOGO_HEADER <asm/bfin_logo_rgb565_230x230_lzma.h>
+#else
+# define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h>
+#endif
+#endif /* CONFIG_VIDEO */
 
 /*
  * Misc Settings
@@ -167,12 +161,6 @@
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	1
 
-/* Don't waste time transferring a logo over the UART */
-#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-# define CONFIG_VIDEO
-#endif
-
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */