X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf527-ezkit.h;h=d945b8d7bfc0ca14ab15351c0717627c3d589c42;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=28b3760f69c124d691f82047a5895babf1b0ed3b;hpb=808bf7cf655a1caa5f48f6f3a6b274f4b83ab8b4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h
index 28b3760..d945b8d 100644
--- a/include/configs/bf527-ezkit.h
+++ b/include/configs/bf527-ezkit.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF537 STAMP board
+ * U-Boot - Configuration file for BF537 STAMP board
  */
 
 #ifndef __CONFIG_BF527_EZKIT_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf527-0.0
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +36,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
-
 /*
  * Memory Settings
  */
@@ -55,7 +52,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(640 * 1024)
 
-
 /*
  * NAND Settings
  * (can't be used same time as ethernet)
@@ -71,7 +67,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #endif
 
-
 /*
  * Network Settings
  */
@@ -94,15 +89,12 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	259
 
-
 /*
  * SPI Settings
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH_STMICRO
-
 
 /*
  * Env Storage Settings
@@ -126,29 +118,22 @@
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 
-
 /*
  * I2C Settings
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_ADI
 
-
 /*
  * USB Settings
  */
 #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
-#define CONFIG_USB
-#define CONFIG_MUSB_HCD
+#define CONFIG_USB_MUSB_HCD
 #define CONFIG_USB_BLACKFIN
-#define CONFIG_USB_STORAGE
-#define CONFIG_MUSB_TIMEOUT 100000
+#define CONFIG_USB_MUSB_TIMEOUT 100000
 #endif
 
 /* Don't waste time transferring a logo over the UART */
-#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-/*# define CONFIG_VIDEO*/
-#endif
 
 /*
  * Video Settings