X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf527-ezkit.h;h=92c183e27c25cf47382f427c8ee7c235dd261255;hb=ed1d98d801dfb6384d0f2fff45ce1ebf884944ca;hp=5f3cb836299d85f8f4a2e6c663b2e5a9bd9c7fd8;hpb=76d82187c6cccbcd8d514015c3b283f05ee8ac5c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h
index 5f3cb83..92c183e 100644
--- a/include/configs/bf527-ezkit.h
+++ b/include/configs/bf527-ezkit.h
@@ -61,15 +61,14 @@
  * (can't be used same time as ethernet)
  */
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
-#define CONFIG_BFIN_NFC
+# define CONFIG_BFIN_NFC
+# define CONFIG_BFIN_NFC_BOOTROM_ECC
 #endif
 #ifdef CONFIG_BFIN_NFC
 #define CONFIG_BFIN_NFC_CTL_VAL	0x0033
 #define CONFIG_DRIVER_NAND_BFIN
 #define CONFIG_SYS_NAND_BASE		0 /* not actually used */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
-#define CONFIG_CMD_NAND
 #endif
 
 
@@ -82,12 +81,11 @@
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
 #define CONFIG_NETCONSOLE	1
-#define CONFIG_NET_MULTI	1
 #endif
 #define CONFIG_HOSTNAME		bf527-ezkit
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
+#define CONFIG_LIB_RAND
 
 /*
  * Flash Settings
@@ -118,14 +116,19 @@
 #define CONFIG_ENV_OFFSET	0x10000
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET	0x40000
+#define CONFIG_ENV_SIZE		0x20000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OFFSET	0x4000
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_ENV_SECT_SIZE	0x2000
-#endif
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
 
 
 /*
@@ -133,8 +136,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C	1
 #define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
 
 
 /*
@@ -148,6 +149,29 @@
 #define CONFIG_MUSB_TIMEOUT 100000
 #endif
 
+/* Don't waste time transferring a logo over the UART */
+#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
+/*# define CONFIG_VIDEO*/
+#endif
+
+/*
+ * Video Settings
+ */
+#ifdef CONFIG_VIDEO
+#ifdef CONFIG_BF527_EZKIT_REV_2_1
+# define CONFIG_LQ035Q1_SPI_BUS	0
+# define CONFIG_LQ035Q1_SPI_CS	7
+# define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
+#else
+# define CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI
+#endif
+
+#ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
+# define EASYLOGO_HEADER <asm/bfin_logo_rgb565_230x230_lzma.h>
+#else
+# define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h>
+#endif
+#endif /* CONFIG_VIDEO */
 
 /*
  * Misc Settings
@@ -155,12 +179,7 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	1
-
-/* Don't waste time transferring a logo over the UART */
-#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-# define CONFIG_VIDEO
-#endif
-
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
 
 /*
  * Pull in common ADI header for remaining command/environment setup