X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf526-ezbrd.h;h=d0a364c330a078a06cf7c694cdb4bd3cabdd75c0;hb=645176d1d5c37c91ddb06c366678fbe302550387;hp=82396d0ed2582f685f3aee687c0ccdf20519355e;hpb=9efac4a1eb99d9c5539aa6992025eeacab7980c6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h
index 82396d0..d0a364c 100644
--- a/include/configs/bf526-ezbrd.h
+++ b/include/configs/bf526-ezbrd.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF526 EZBrd board
+ * U-Boot - Configuration file for BF526 EZBrd board
  */
 
 #ifndef __CONFIG_BF526_EZBRD_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf526-0.0
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +36,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			5
 
-
 /*
  * Memory Settings
  */
@@ -53,27 +50,25 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
 #define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
 
-#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(512 * 1024)
 
-
 /*
  * NAND Settings
  * (can't be used same time as ethernet)
  */
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
-#define CONFIG_BFIN_NFC
+# define CONFIG_BFIN_NFC
+# define CONFIG_BFIN_NFC_BOOTROM_ECC
 #endif
 #ifdef CONFIG_BFIN_NFC
 #define CONFIG_BFIN_NFC_CTL_VAL	0x0033
 #define CONFIG_DRIVER_NAND_BFIN
 #define CONFIG_SYS_NAND_BASE		0 /* not actually used */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
 #define CONFIG_CMD_NAND
 #endif
 
-
 /*
  * Network Settings
  */
@@ -83,12 +78,8 @@
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
 #define CONFIG_NETCONSOLE	1
-#define CONFIG_NET_MULTI	1
 #endif
 #define CONFIG_HOSTNAME		bf526-ezbrd
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -100,16 +91,12 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	71
 
-
 /*
  * SPI Settings
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SST
-
 
 /*
  * Env Storage Settings
@@ -128,26 +115,21 @@
 #endif
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 
-
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 /*
  * USB Settings
  */
 #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
-#define CONFIG_USB
-#define CONFIG_MUSB_HCD
+#define CONFIG_USB_MUSB_HCD
 #define CONFIG_USB_BLACKFIN
-#define CONFIG_USB_STORAGE
-#define CONFIG_MUSB_TIMEOUT 100000
+#define CONFIG_USB_MUSB_TIMEOUT 100000
 #endif
 
-
 /*
  * Misc Settings
  */
@@ -173,7 +155,6 @@
 /* #define STATUS_LED_BIT2 GPIO_PG12 */
 #endif
 
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */