X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf526-ezbrd.h;h=d0a364c330a078a06cf7c694cdb4bd3cabdd75c0;hb=645176d1d5c37c91ddb06c366678fbe302550387;hp=35a2228a6b871f2083196b6b8718b4786bb78435;hpb=f1993ca066100fcaba7d49fecae0ef604e5807e2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h
index 35a2228..d0a364c 100644
--- a/include/configs/bf526-ezbrd.h
+++ b/include/configs/bf526-ezbrd.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BF526 EZBrd board
+ * U-Boot - Configuration file for BF526 EZBrd board
  */
 
 #ifndef __CONFIG_BF526_EZBRD_H__
@@ -7,14 +7,12 @@
 
 #include <asm/config-pre.h>
 
-
 /*
  * Processor Settings
  */
 #define CONFIG_BFIN_CPU             bf526-0.0
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +36,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			5
 
-
 /*
  * Memory Settings
  */
@@ -56,7 +53,6 @@
 #define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(512 * 1024)
 
-
 /*
  * NAND Settings
  * (can't be used same time as ethernet)
@@ -73,7 +69,6 @@
 #define CONFIG_CMD_NAND
 #endif
 
-
 /*
  * Network Settings
  */
@@ -96,7 +91,6 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	71
 
-
 /*
  * SPI Settings
  */
@@ -104,7 +98,6 @@
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
 
-
 /*
  * Env Storage Settings
  */
@@ -122,26 +115,21 @@
 #endif
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 
-
 /*
  * I2C Settings
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_ADI
 
-
 /*
  * USB Settings
  */
 #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
-#define CONFIG_USB
 #define CONFIG_USB_MUSB_HCD
 #define CONFIG_USB_BLACKFIN
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_MUSB_TIMEOUT 100000
 #endif
 
-
 /*
  * Misc Settings
  */
@@ -167,7 +155,6 @@
 /* #define STATUS_LED_BIT2 GPIO_PG12 */
 #endif
 
-
 /*
  * Pull in common ADI header for remaining command/environment setup
  */