X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbcm_ep_board.h;h=b67100aa3aa40a03a7f76d75081d1c85817c8036;hb=e4b91f085d4259f187052ff724c80af38fc11b18;hp=fb85c7263b19103d405ace79b92bb9e0b4940977;hpb=1fc4e6f486cc1e9d2dcf0ba86e6021c3d83dce51;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h
index fb85c72..b67100a 100644
--- a/include/configs/bcm_ep_board.h
+++ b/include/configs/bcm_ep_board.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Broadcom Corporation.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __BCM_EP_BOARD_H
@@ -11,8 +10,6 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 /*
  * Memory configuration
  * (these must be defined elsewhere)
@@ -27,17 +24,11 @@
 #error	CONFIG_SYS_SDRAM_SIZE must be defined!
 #endif
 
-#define CONFIG_NR_DRAM_BANKS		1
-
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-#define CONFIG_STACKSIZE		(256 * 1024)
 
 /* Some commands use this as the default load address */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
 
-/* No mtest functions as recommended */
-#undef CONFIG_CMD_MEMORY
-
 /*
  * This is the initial SP which is used only briefly for relocating the u-boot
  * image to the top of SDRAM. After relocation u-boot moves the stack to the
@@ -49,65 +40,17 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Serial Info */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 
-#define CONFIG_BAUDRATE			115200
-
 #define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */
 
 /* console configuration */
 #define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
 #define CONFIG_SYS_MAXARGS		64
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-/*
- * One partition type must be defined for part.c
- * This is necessary for the fatls command to work on an SD card
- * for example.
- */
-#define CONFIG_DOS_PARTITION
-
 /* version string, parser, etc */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_COMMAND_HISTORY
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/* Commands */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_FAT
-#define CONFIG_FAT_WRITE
-
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
-/* SHA hashing */
-#define CONFIG_CMD_HASH
-#define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
 
 /* Enable Time Command */
-#define CONFIG_CMD_TIME
-
-#define CONFIG_CMD_BOOTZ
-
-/* Misc utility code */
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CRC32_VERIFY
 
 #endif /* __BCM_EP_BOARD_H */