X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbcm28155_ap.h;h=2e2aa3dea2aea5f3f39afb57f8300ae34616fe18;hb=432e39806805c46d583e75e8dd2f7b71cc6089c1;hp=104577995e5f2c683cd0b58d50508871e93edc6f;hpb=fc9b0b80435cda721fbdbe507c9e4f388b0ea62b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index 1045779..2e2aa3d 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -13,7 +13,6 @@
 /* CPU, chip, mach, etc */
 #define CONFIG_KONA
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * Memory configuration
@@ -25,18 +24,11 @@
 #define CONFIG_NR_DRAM_BANKS		1
 
 #define CONFIG_SYS_MALLOC_LEN		SZ_4M	/* see armv7/start.S. */
-#define CONFIG_STACKSIZE		SZ_256K
 
 /* GPIO Driver */
 #define CONFIG_KONA_GPIO
 
 /* MMC/SD Driver */
-#define CONFIG_SDHCI
-#define CONFIG_MMC_SDMA
-#define CONFIG_KONA_SDHCI
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
@@ -71,7 +63,6 @@
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
 
 /* No mtest functions as recommended */
-#undef CONFIG_CMD_MEMORY
 
 /*
  * This is the initial SP which is used only briefly for relocating the u-boot
@@ -81,7 +72,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
 
 /* Serial Info */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 /* Post pad 3 bytes after each reg addr */
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
@@ -89,17 +79,13 @@
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_COM1		0x3e000000
 
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_ENV_SIZE			0x10000
-#define CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */
+/* must fit into GPT:u-boot-env partition */
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_OFFSET		(0x00011a00 * 512)
+#define CONFIG_ENV_SIZE			(8 * 512)
 
 /* console configuration */
 #define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
 #define CONFIG_SYS_MAXARGS		64
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
@@ -108,33 +94,17 @@
  * This is necessary for the fatls command to work on an SD card
  * for example.
  */
-#define CONFIG_DOS_PARTITION
 
 /* version string, parser, etc */
-#define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /* Initial upstream - boot to cmd prompt only */
 #define CONFIG_BOOTCOMMAND		""
 
-/* Commands */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_FAT_WRITE
-
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+#define CONFIG_USBID_ADDR		0x34052c46
 
 #endif /* __BCM28155_AP_H */