X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbcm23550_w1d.h;h=e771548aa6708de9864016d3dff4a139fe3e840c;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=bd3c7116d5348562510ec1b540ca95c748c09f2f;hpb=232d77e7238e41779f952094b302c47caea4d159;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/bcm23550_w1d.h b/include/configs/bcm23550_w1d.h
index bd3c711..e771548 100644
--- a/include/configs/bcm23550_w1d.h
+++ b/include/configs/bcm23550_w1d.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2013 Broadcom Corporation.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __BCM23550_W1D_H
@@ -18,25 +17,16 @@
 /*
  * Memory configuration
  */
-#define CONFIG_SYS_TEXT_BASE		0x9f000000
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
-#define CONFIG_NR_DRAM_BANKS		1
 
 #define CONFIG_SYS_MALLOC_LEN		SZ_4M	/* see armv7/start.S. */
-#define CONFIG_STACKSIZE		SZ_256K
 
 /* GPIO Driver */
 #define CONFIG_KONA_GPIO
 
 /* MMC/SD Driver */
-#define CONFIG_SDHCI
-#define CONFIG_MMC_SDMA
-#define CONFIG_KONA_SDHCI
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
@@ -65,7 +55,6 @@
 #define CONFIG_SYS_TIMER_COUNTER	(TIMER_BASE_ADDR + 4) /* STCLO offset */
 
 /* Init functions */
-#define CONFIG_MISC_INIT_R	/* board's misc_init_r function */
 
 /* Some commands use this as the default load address */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
@@ -84,23 +73,13 @@
 /* Post pad 3 bytes after each reg addr */
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		13000000
-#define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_COM1		0x3e000000
 
-#define CONFIG_BAUDRATE			115200
-
 /* must fit into GPT:u-boot-env partition */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_OFFSET		(0x00011a00 * 512)
-#define CONFIG_ENV_SIZE			(8 * 512)
-
-#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */
 
 /* console configuration */
 #define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
 #define CONFIG_SYS_MAXARGS		64
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
@@ -109,40 +88,14 @@
  * This is necessary for the fatls command to work on an SD card
  * for example.
  */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
 
 /* version string, parser, etc */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
 
 /* Initial upstream - boot to cmd prompt only */
 #define CONFIG_BOOTCOMMAND		""
 
-/* Commands */
-#define CONFIG_FAT_WRITE
-
-/* Fastboot and USB OTG */
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_FASTBOOT_FLASH
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV	0
-#define CONFIG_SYS_CACHELINE_SIZE	64
-#define CONFIG_FASTBOOT_BUF_SIZE	0x1d000000
-#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_SDRAM_BASE
-#undef CONFIG_USB_GADGET_VBUS_DRAW
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
-#define CONFIG_USB_GADGET_DWC2_PHY_8_BIT
-#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
 #define CONFIG_USBID_ADDR		0x34052c46
 
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_SYS_L2CACHE_OFF
 
 #endif /* __BCM23550_W1D_H */