X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbaltos.h;h=e7946389eff32791bf369bf7a8e01bbd2fa07ddb;hb=605bc145f91d2a28ba2e517cae4e53e255e34b6f;hp=2fe6c8639392096288d0464cc0f0a0f234d39165;hpb=50c84208ad50a27382c64af911abba4510a8b608;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 2fe6c86..e794638 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -24,20 +24,17 @@
 #define V_SCLK				(V_OSCK)
 
 /* FIT support */
-#define CONFIG_SYS_BOOTM_LEN         SZ_64M
 
 #ifdef CONFIG_MTD_RAW_NAND
 
 #define NANDARGS \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"${mtdparts} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype}\0" \
 	"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
-	"nandrootfstype=ubifs rootwait=1\0" \
+	"nandrootfstype=ubifs rootwait\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
 		"setenv loadaddr 0x84000000; " \
@@ -52,8 +49,7 @@
 #define NANDARGS ""
 #endif
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
 	"boot_fdt=try\0" \
 	"bootpart=0:2\0" \
@@ -183,40 +179,20 @@
 	"findfdt=setenv fdtfile am335x-baltos.dtb\0" \
 	NANDARGS
 	/*DFUARGS*/
-#endif
-
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"run usbboot;" \
-	"run mmcboot;" \
-	"setenv mmcdev 1; " \
-	"setenv bootpart 1:2; " \
-	"run mmcboot;" \
-	"run nandboot;"
 
 /* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
-#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
-#define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
-#define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
-#define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
-#define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
-
-/* PMIC support */
-#define CONFIG_POWER_TPS65910
+#define CFG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
+#define CFG_SYS_NS16550_COM2		0x48022000	/* UART1 */
+#define CFG_SYS_NS16550_COM3		0x48024000	/* UART2 */
+#define CFG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
+#define CFG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
+#define CFG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
 /* SPL */
 #ifndef CONFIG_NOR_BOOT
 
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
+#define CFG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
 					 26, 27, 28, 29, 30, 31, 32, 33, \
@@ -224,26 +200,12 @@
 					 42, 43, 44, 45, 46, 47, 48, 49, \
 					 50, 51, 52, 53, 54, 55, 56, 57, }
 
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+#define CFG_SYS_NAND_ECCSIZE		512
+#define CFG_SYS_NAND_ECCBYTES	14
+#define CFG_SYS_NAND_U_BOOT_START	CONFIG_TEXT_BASE
 #endif
 #endif
 
-/*
- * USB configuration.  We enable MUSB support, both for host and for
- * gadget.  We set USB0 as peripheral and USB1 as host, based on the
- * board schematic and physical port wired to each.  Then for host we
- * add mass storage support and for gadget we add both RNDIS ethernet
- * and DFU.
- */
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_OTG
-
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 #define GPMC_NAND_ECC_LP_x8_LAYOUT	1