X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbaltos.h;h=266b2ae04b3ff808747854550b538d9a71b32523;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=03559bd4f5f6536a6017af135e7b77c0bbcadd92;hpb=d291d8235b9fd5049ffeda461ece44f873189513;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 03559bd..266b2ae 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -19,42 +19,22 @@
 #include <linux/sizes.h>
 #include <configs/ti_am335x_common.h>
 
-#define CONFIG_MACH_TYPE		MACH_TYPE_AM335XEVM
-
 /* Clock Defines */
 #define V_OSCK				24000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)
 
-/* Custom script for NOR */
-#define CONFIG_SYS_LDSCRIPT		"board/vscom/baltos/u-boot.lds"
-
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE			(128 << 10)
-
 /* FIT support */
-#define CONFIG_SYS_BOOTM_LEN         SZ_64M
 
-/* UBI Support */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
+#ifdef CONFIG_MTD_RAW_NAND
 
-/* I2C configuration */
-
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00080000
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
-#endif
 #define NANDARGS \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"${mtdparts} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype}\0" \
 	"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
-	"nandrootfstype=ubifs rootwait=1\0" \
+	"nandrootfstype=ubifs rootwait\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
 		"setenv loadaddr 0x84000000; " \
@@ -69,7 +49,6 @@
 #define NANDARGS ""
 #endif
 
-#ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
 	"boot_fdt=try\0" \
@@ -200,16 +179,6 @@
 	"findfdt=setenv fdtfile am335x-baltos.dtb\0" \
 	NANDARGS
 	/*DFUARGS*/
-#endif
-
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"run usbboot;" \
-	"run mmcboot;" \
-	"setenv mmcdev 1; " \
-	"setenv bootpart 1:2; " \
-	"run mmcboot;" \
-	"run nandboot;"
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
@@ -219,24 +188,13 @@
 #define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
 #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-
 /* PMIC support */
 #define CONFIG_POWER_TPS65910
 
 /* SPL */
 #ifndef CONFIG_NOR_BOOT
 
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
@@ -247,32 +205,12 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #endif
 #endif
 
-/*
- * USB configuration.  We enable MUSB support, both for host and for
- * gadget.  We set USB0 as peripheral and USB1 as host, based on the
- * board schematic and physical port wired to each.  Then for host we
- * add mass storage support and for gadget we add both RNDIS ethernet
- * and DFU.
- */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_OTG
-
-/* Network. */
-#define CONFIG_PHY_SMSC
-#define CONFIG_MII
-#define CONFIG_PHY_ATHEROS
-
 /* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define GPMC_NAND_ECC_LP_x8_LAYOUT	1
 #endif