X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbaltos.h;h=10979c72ca7fbad98ad85444fb727ee6915eddef;hb=4bafceff0e9e5a36908031e41c69a6b37e82da58;hp=258e8bd9a8f0f1d2e753800f77d2d13b426f75b7;hpb=3146f0c017df2231d03dff09cee31f7bd63db3e5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 258e8bd..10979c7 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -39,19 +39,15 @@
 #define CONFIG_MTD_DEVICE
 
 /* I2C configuration */
-#undef CONFIG_SYS_OMAP24_I2C_SPEED
-#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
 
 #ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00080000
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
-#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
 #endif
 #define NANDARGS \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"${mtdparts} " \
@@ -234,21 +230,13 @@
 
 /* SPL */
 #ifndef CONFIG_NOR_BOOT
-/* Bootcount using the RTC block */
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_AM33XX
 
 /* USB gadget RNDIS */
 
 /* General network SPL, both CPSW and USB gadget RNDIS */
 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"*/
 
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
-
 #ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					 CONFIG_SYS_NAND_PAGE_SIZE)
@@ -279,20 +267,12 @@
  * add mass storage support and for gadget we add both RNDIS ethernet
  * and DFU.
  */
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_OTG
 
-#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
-#endif /* CONFIG_USB_MUSB_GADGET */
-
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 /* disable host part of MUSB in SPL */
 /* disable EFI partitions and partition UUID support */
@@ -302,7 +282,6 @@
 #endif
 
 /* Network. */
-#define CONFIG_PHY_GIGE
 #define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_SMSC
 #define CONFIG_MII
@@ -311,15 +290,6 @@
 /* NAND support */
 #ifdef CONFIG_NAND
 #define GPMC_NAND_ECC_LP_x8_LAYOUT	1
-#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
-#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
-					"128k(SPL.backup1)," \
-					"128k(SPL.backup2)," \
-					"128k(SPL.backup3)," \
-					"1920k(u-boot)," \
-					"-(UBI)"
-#endif
 #endif
 
 #endif	/* ! __CONFIG_BALTOS_H */