X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fbaltos.h;h=006b049d09d71eeb1a5afc67362052ebc8cb1191;hb=0223462b373b975d970fa86e5e1a7eadd1d41820;hp=c65eeedb531d8840eda596f22f249cf035ab16a7;hpb=3a517fdc2b7e17e03730e768304ecefb3a213f17;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index c65eeed..006b049 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -35,27 +35,17 @@
 #define CONFIG_SYS_BOOTM_LEN         SZ_64M
 
 /* UBI Support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS
 
 /* I2C configuration */
-#undef CONFIG_SYS_OMAP24_I2C_SPEED
-#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
 
 #ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00080000
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
-#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
 #endif
 #define NANDARGS \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"${mtdparts} " \
@@ -77,8 +67,6 @@
 #define NANDARGS ""
 #endif
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
@@ -229,7 +217,6 @@
 #define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
 #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
@@ -239,21 +226,8 @@
 
 /* SPL */
 #ifndef CONFIG_NOR_BOOT
-/* Bootcount using the RTC block */
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_AM33XX
-
-/* USB gadget RNDIS */
-
-/* General network SPL, both CPSW and USB gadget RNDIS */
-#define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"*/
-
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 #ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					 CONFIG_SYS_NAND_PAGE_SIZE)
@@ -284,50 +258,19 @@
  * add mass storage support and for gadget we add both RNDIS ethernet
  * and DFU.
  */
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_OTG
 
-#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
-#endif /* CONFIG_USB_MUSB_GADGET */
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
-/* disable host part of MUSB in SPL */
-/* disable EFI partitions and partition UUID support */
-/*
- * Disable CPSW SPL support so we fit within the 101KiB limit.
- */
-#endif
-
 /* Network. */
-#define CONFIG_PHY_GIGE
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR			0
 #define CONFIG_PHY_SMSC
-#define CONFIG_MII
 #define CONFIG_PHY_ATHEROS
 
 /* NAND support */
 #ifdef CONFIG_NAND
-#define CONFIG_CMD_NAND
 #define GPMC_NAND_ECC_LP_x8_LAYOUT	1
-#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
-#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
-					"128k(SPL.backup1)," \
-					"128k(SPL.backup2)," \
-					"128k(SPL.backup3)," \
-					"1920k(u-boot)," \
-					"-(UBI)"
-#define CONFIG_ENV_IS_NOWHERE
-#endif
 #endif
 
 #endif	/* ! __CONFIG_BALTOS_H */