X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Faxs10x.h;h=96a1c6400c51f37e0b5aedd91b866dbe4a5749ef;hb=72d81360aabd0485d3832d292bbea29c7c4554ef;hp=66e8cd5e9a4b2b424c50359a5d2293259a446265;hpb=380e86f361e4e2aef83295972863654fde157560;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h
index 66e8cd5..96a1c64 100644
--- a/include/configs/axs10x.h
+++ b/include/configs/axs10x.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013-2016 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_AXS10X_H_
@@ -29,59 +28,19 @@
 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN		SZ_2M
-#define CONFIG_SYS_BOOTM_LEN		SZ_32M
+#define CONFIG_SYS_BOOTM_LEN		SZ_128M
 #define CONFIG_SYS_LOAD_ADDR		0x82000000
 
 /*
- * This board might be of different versions so handle it
- */
-#define CONFIG_BOARD_TYPES
-
-/*
- * NAND Flash configuration
- */
-#define CONFIG_SYS_NAND_BASE		(ARC_FPGA_PERIPHERAL_BASE + 0x16000)
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-/*
  * UART configuration
  */
-#define CONFIG_DW_SERIAL
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_CLK		33333333
 #define CONFIG_SYS_NS16550_MEM32
 
 /*
- * I2C configuration
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_I2C_ENV_EEPROM_BUS	2
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SPEED1		100000
-#define CONFIG_SYS_I2C_SPEED2		100000
-#define CONFIG_SYS_I2C_SLAVE		0
-#define CONFIG_SYS_I2C_SLAVE1		0
-#define CONFIG_SYS_I2C_SLAVE2		0
-#define CONFIG_SYS_I2C_BASE		0xE001D000
-#define CONFIG_SYS_I2C_BASE1		0xE001E000
-#define CONFIG_SYS_I2C_BASE2		0xE001F000
-#define CONFIG_SYS_I2C_BUS_MAX		3
-#define IC_CLK				50
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		(0xA8 >> 1)
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	64
-
-/*
  * Ethernet PHY configuration
  */
-#define CONFIG_MII
-#define CONFIG_PHY_GIGE
 
 /*
  * USB 1.1 configuration
@@ -90,39 +49,23 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 
 /*
- * Commands still not supported in Kconfig
- */
-#define CONFIG_CMD_NAND
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_MAXARGS		16
-
-/*
  * Environment settings
  */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE			SZ_512
-#define CONFIG_ENV_OFFSET		0
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"upgrade=if mmc rescan && " \
+		"fatload mmc 0:1 ${loadaddr} u-boot-update.img && " \
+		"iminfo ${loadaddr} && source ${loadaddr}; then; else echo " \
+		"\"Fail to upgrade.\n" \
+		"Do you have u-boot-update.img and u-boot.head on first (FAT) SD card partition?\"" \
+		"; fi\0"
 
 /*
  * Environment configuration
  */
 #define CONFIG_BOOTFILE			"uImage"
-#define CONFIG_BOOTARGS			"console=ttyS3,115200n8"
-#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
 
 /*
  * Console configuration
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE		SZ_256
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-						sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/*
- * Misc utility configuration
- */
-#define CONFIG_BOUNCE_BUFFER
 
 #endif /* _CONFIG_AXS10X_H_ */