X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fax25-ae350.h;h=b566ecf296ffbaea42f56242efb6b95d9bd04730;hb=6786ce1ce14feb4d02854a0c04bc0cce505be46e;hp=754e909619400722993f28d8b3b78398cf083798;hpb=52af0101be55da74a32e9b169864508101f886fe;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
index 754e909..b566ecf 100644
--- a/include/configs/ax25-ae350.h
+++ b/include/configs/ax25-ae350.h
@@ -28,37 +28,26 @@
 	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)	/* SDRAM Bank #2 */
 #define PHYS_SDRAM_0_SIZE	0x20000000	/* 512 MB */
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512 MB */
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_0
+#define CFG_SYS_SDRAM_BASE	PHYS_SDRAM_0
 
 /*
  * Serial console configuration
  */
-#define CONFIG_SYS_NS16550_SERIAL
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#endif
-#define CONFIG_SYS_NS16550_CLK		19660800
+#define CFG_SYS_NS16550_CLK		19660800
 
 /* Init Stack Pointer */
 
 /* support JEDEC */
 #define PHYS_FLASH_1			0x88000000	/* BANK 0 */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, }
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* TO for Flash Erase (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* TO for Flash Write (ms) */
+#define CFG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CFG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, }
 
 /* max number of memory banks */
 /*
  * There are 4 banks supported for this Controller,
  * but we have only 1 bank connected to flash on board
 */
-#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
-
-/* max number of sectors on one chip */
-#define CONFIG_FLASH_SECTOR_SIZE	(0x10000*2)
-#define CONFIG_SYS_MAX_FLASH_SECT	512
+#define CFG_SYS_FLASH_BANKS_SIZES {0x4000000}
 
 /* environments */
 
@@ -71,9 +60,8 @@
  */
 
 /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)
+#define CFG_SYS_BOOTMAPSZ	(64 << 20)
 /* Increase max gunzip size */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)
 
 /* Support autoboot from RAM (kernel image is loaded via debug port) */
 #define KERNEL_IMAGE_ADDR	"0x2000000 "
@@ -94,7 +82,7 @@
 	func(RAM, ram, na)
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_EXTRA_ENV_SETTINGS	\
+#define CFG_EXTRA_ENV_SETTINGS	\
 				"kernel_addr_r=0x00080000\0" \
 				"pxefile_addr_r=0x01f00000\0" \
 				"scriptaddr=0x01f00000\0" \