X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fax25-ae350.h;h=b2606e794dd27dc54051bddbb5ecff5ad9b2198b;hb=19ea606109135c3d9892d86e1b1c2a8fb551cc1b;hp=b1ca5ac11a9f889fb544edd1f6ef83fa44b9eaf9;hpb=caa2a2e5ab44d87faf51fafc780ecc985e0c05d6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
index b1ca5ac..b2606e7 100644
--- a/include/configs/ax25-ae350.h
+++ b/include/configs/ax25-ae350.h
@@ -7,11 +7,19 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_MAX_SIZE		0x00100000
+#define CONFIG_SPL_BSS_START_ADDR	0x04000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x00100000
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.itb"
+#endif
+#endif
+
 /*
  * CPU and Board Configuration Options
  */
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_SERVERIP
 
 /*
  * Miscellaneous configurable options
@@ -41,12 +49,11 @@
 #define CONFIG_SYS_MALLOC_LEN   (512 << 10)
 
 /* DT blob (fdt) address */
-#define CONFIG_SYS_FDT_BASE		0x000f0000
+#define CONFIG_SYS_FDT_BASE		0x800f0000
 
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	2
 #define PHYS_SDRAM_0	0x00000000		/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1	\
 	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)	/* SDRAM Bank #2 */
@@ -76,19 +83,14 @@
 /*
  * memtest works on 512 MB in DRAM
  */
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_0
-#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)
 
 /*
  * FLASH and environment organization
  */
 
 /* use CFI framework */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
 
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 
 /* support JEDEC */
@@ -118,18 +120,8 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	512
 
 /* environments */
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		50000000
-#define CONFIG_ENV_SPI_MODE		0
-#define CONFIG_ENV_SECT_SIZE		0x1000
-#define CONFIG_ENV_OVERWRITE
 
 /* SPI FLASH */
-#define CONFIG_SF_DEFAULT_BUS		0
-#define CONFIG_SF_DEFAULT_CS		0
-#define CONFIG_SF_DEFAULT_SPEED		1000000
-#define CONFIG_SF_DEFAULT_MODE		0
 
 /*
  * For booting Linux, the board info and command line data
@@ -143,7 +135,6 @@
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)
 
 /* When we use RAM as ENV */
-#define CONFIG_ENV_SIZE 0x2000
 
 /* Enable distro boot */
 #define BOOT_TARGET_DEVICES(func) \