X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fax25-ae350.h;h=83ac87b10a58af7e7e21f2b26f14dcc8298b7c27;hb=aa6e94deabb45154cea07ad44c4a5c047bca078b;hp=1c3f957d324093ce5e8bd9988671eabd0149d6b6;hpb=4afab30caea3211032710c4298a8839d3254e7f7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
index 1c3f957..83ac87b 100644
--- a/include/configs/ax25-ae350.h
+++ b/include/configs/ax25-ae350.h
@@ -7,16 +7,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_SPL
-#define CONFIG_SPL_MAX_SIZE		0x00100000
-#define CONFIG_SPL_BSS_START_ADDR	0x04000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x00100000
-
-#ifdef CONFIG_SPL_MMC
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.itb"
-#endif
-#endif
-
 #define RISCV_MMODE_TIMERBASE           0xe6000000
 #define RISCV_MMODE_TIMER_FREQ          60000000
 
@@ -29,26 +19,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
-
-/*
- * Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE	\
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/*
- * max number of command args
- */
-#define CONFIG_SYS_MAXARGS	16
-
-/*
- * Boot Argument Buffer Size
- */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/* DT blob (fdt) address */
-#define CONFIG_SYS_FDT_BASE		0x800f0000
 
 /*
  * Physical Memory Map
@@ -58,51 +28,29 @@
 	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)	/* SDRAM Bank #2 */
 #define PHYS_SDRAM_0_SIZE	0x20000000	/* 512 MB */
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512 MB */
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_0
+#define CFG_SYS_SDRAM_BASE	PHYS_SDRAM_0
 
 /*
  * Serial console configuration
  */
-#define CONFIG_SYS_NS16550_SERIAL
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#endif
-#define CONFIG_SYS_NS16550_CLK		19660800
+#define CFG_SYS_NS16550_CLK		19660800
 
 /* Init Stack Pointer */
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000000 - \
-					GENERATED_GBL_DATA_SIZE)
-
-/* use CFI framework */
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 
 /* support JEDEC */
-#ifdef CONFIG_CFI_FLASH
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
-#endif/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 #define PHYS_FLASH_1			0x88000000	/* BANK 0 */
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, }
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* TO for Flash Erase (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* TO for Flash Write (ms) */
 
 /* max number of memory banks */
 /*
  * There are 4 banks supported for this Controller,
  * but we have only 1 bank connected to flash on board
 */
-#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#endif
 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 
 /* max number of sectors on one chip */
 #define CONFIG_FLASH_SECTOR_SIZE	(0x10000*2)
-#define CONFIG_SYS_MAX_FLASH_SECT	512
 
 /* environments */
 
@@ -117,7 +65,6 @@
 /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)
 /* Increase max gunzip size */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)
 
 /* Support autoboot from RAM (kernel image is loaded via debug port) */
 #define KERNEL_IMAGE_ADDR	"0x2000000 "