X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fax25-ae350.h;h=03fe9469bf1a55b9527c4e2e2a0be61eebefe0e0;hb=2f57139c211d193debddd25f45c02b738cefd871;hp=45049621710f05e14e27452e93d26da55b109db3;hpb=cd61e86e6d2a86b3affd90eeae3f5c97fe990b04;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index 4504962..03fe946 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -12,49 +12,23 @@ #define CONFIG_SPL_BSS_START_ADDR 0x04000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#ifndef CONFIG_XIP -#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x00200000 -#else -#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80010000 -#endif - -#ifdef CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#ifdef CONFIG_SPL_MMC #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb" #endif #endif -/* - * CPU and Board Configuration Options - */ -#define CONFIG_BOOTP_SEND_HOSTNAME - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* - * Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define RISCV_MMODE_TIMERBASE 0xe6000000 +#define RISCV_MMODE_TIMER_FREQ 60000000 -/* - * max number of command args - */ -#define CONFIG_SYS_MAXARGS 16 +#define RISCV_SMODE_TIMER_FREQ 60000000 /* - * Boot Argument Buffer Size + * CPU and Board Configuration Options */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* - * Size of malloc() pool - * 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough + * Miscellaneous configurable options */ -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* DT blob (fdt) address */ #define CONFIG_SYS_FDT_BASE 0x800f0000 @@ -82,35 +56,14 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \ GENERATED_GBL_DATA_SIZE) -/* - * Load address and memory test area should agree with - * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* SDRAM */ - -/* - * memtest works on 512 MB in DRAM - */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) - -/* - * FLASH and environment organization - */ - /* use CFI framework */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* support JEDEC */ -#ifdef CONFIG_CFI_FLASH -#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 -#endif/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ #define PHYS_FLASH_1 0x88000000 /* BANK 0 */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ @@ -120,9 +73,6 @@ * There are 4 banks supported for this Controller, * but we have only 1 bank connected to flash on board */ -#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#endif #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} /* max number of sectors on one chip */ @@ -130,7 +80,6 @@ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* environments */ -#define CONFIG_ENV_OVERWRITE /* SPI FLASH */ @@ -145,12 +94,23 @@ /* Increase max gunzip size */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) +/* Support autoboot from RAM (kernel image is loaded via debug port) */ +#define KERNEL_IMAGE_ADDR "0x2000000 " +#define BOOTENV_DEV_NAME_RAM(devtypeu, devtypel, instance) \ + "ram " +#define BOOTENV_DEV_RAM(devtypeu, devtypel, instance) \ + "bootcmd_ram=" \ + "booti " \ + KERNEL_IMAGE_ADDR \ + "- $fdtcontroladdr\0" + /* When we use RAM as ENV */ /* Enable distro boot */ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ - func(DHCP, dhcp, na) + func(DHCP, dhcp, na) \ + func(RAM, ram, na) #include #define CONFIG_EXTRA_ENV_SETTINGS \