X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fatngw100mkii.h;h=a7f5e06c684df300dbdb0ce22bf20d21b5ab8148;hb=b8682a7fcf69344ac5a2d57c75f9c93bfdc93142;hp=83747336c658063eb8094ba96b7c3b78fec2d3ec;hpb=4d80051b63ff54f6b6f90fceb92cf87ab3401ecb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 8374733..a7f5e06 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2006 Atmel Corporation
  *
- * Copyright (C) 2012 Andreas Bießmann <andreas.devel@googlemail.com>
+ * Copyright (C) 2012 Andreas Bießmann <andreas@biessmann.org>
  *
  * Configuration settings for the AVR32 Network Gateway
  *
@@ -16,8 +16,6 @@
 #define CONFIG_AT32AP7000
 #define CONFIG_ATNGW100MKII
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /*
@@ -68,31 +66,16 @@
 #define CONFIG_USART_ID			1
 
 /* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-#define CONFIG_STACKSIZE		(2048)
-
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTARGS							\
 	"root=mtd:main rootfstype=jffs2"
 #define CONFIG_BOOTCOMMAND						\
 	"fsload 0x10400000 /uImage; bootm"
 
-/*
- * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
- * data on the serial line may interrupt the boot sequence.
- */
-#define CONFIG_BOOTDELAY		1
-#define CONFIG_AUTOBOOT
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-#define CONFIG_AUTOBOOT_STOP_STR	" "
 
 /*
  * After booting the board for the first time, new ethernet addresses
@@ -110,35 +93,15 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_MII
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART
 #define CONFIG_MACB
 #define CONFIG_PORTMUX_PIO
 #define CONFIG_SYS_NR_PIOS		5
 #define CONFIG_SYS_HSDRAMC
-#define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_GENERIC_MMC
 #define CONFIG_ATMEL_SPI
 
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-
 #define CONFIG_SYS_DCACHE_LINESZ	32
 #define CONFIG_SYS_ICACHE_LINESZ	32
 
@@ -173,7 +136,6 @@
 #define CONFIG_SYS_BOOTPARAMS_LEN	(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)