X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fatngw100.h;h=4c27225d844858b8cb280d2a8cc7b11aa386a6f4;hb=cb33bda44f4bbf6fb58adf41dced313ca38da6fc;hp=9c81e3199f916d49d498d6ce3c5a7bd68ec95aec;hpb=e97f9d817e600cd6f43d1d0da76f5787e33a5c56;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 9c81e31..4c27225 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -14,6 +14,8 @@
 #define CONFIG_AT32AP7000
 #define CONFIG_ATNGW100
 
+#define CONFIG_BOARD_EARLY_INIT_R
+
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
@@ -45,31 +47,16 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_USART1
 #define CONFIG_USART_ID			1
 /* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-#define CONFIG_STACKSIZE		(2048)
-
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTARGS							\
 	"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
 #define CONFIG_BOOTCOMMAND						\
 	"fsload; bootm"
 
-/*
- * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
- * data on the serial line may interrupt the boot sequence.
- */
-#define CONFIG_BOOTDELAY		1
-#define CONFIG_AUTOBOOT
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-#define CONFIG_AUTOBOOT_STOP_STR	" "
 
 /*
  * After booting the board for the first time, new ethernet addresses
@@ -87,35 +74,16 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_XIMG
 
 #define CONFIG_ATMEL_USART
 #define CONFIG_MACB
 #define CONFIG_PORTMUX_PIO
 #define CONFIG_SYS_NR_PIOS			5
 #define CONFIG_SYS_HSDRAMC
-#define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_GENERIC_MMC
 #define CONFIG_ATMEL_SPI
 
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
 
@@ -143,14 +111,12 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN			(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
 #define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_PROMPT			"U-Boot> "
 #define CONFIG_SYS_CBSIZE			256
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)