X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9x5ek.h;h=e6d5b9925d3922fc9c32eeef018a46ad1a0cdee5;hb=be7dbb60c5bfa38ea444fe7de1dca8bd35f83f5b;hp=6adb965c3cd6eaf9bdc31fd72f2d7324fa20c5b5;hpb=27fb313dd639efc72beb08124fe4aa37bfd2c299;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 6adb965..e6d5b99 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -12,11 +12,6 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
 
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
@@ -38,9 +33,6 @@
 	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED		30000000
-#endif
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -68,50 +60,15 @@
 #endif
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		0x26e00000
-
 #ifdef CONFIG_NAND_BOOT
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x140000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND	"nand read " \
-				"0x22000000 0x200000 0x600000; " \
-				"nand read 0x21000000 0x180000 0x20000; " \
-				"bootz 0x22000000 - 0x21000000"
 #elif defined(CONFIG_SPI_BOOT)
 /* bootstrap + u-boot + env + linux in spi flash */
-#define CONFIG_ENV_OFFSET	0x5000
-#define CONFIG_ENV_SIZE		0x3000
-#define CONFIG_ENV_SECT_SIZE	0x1000
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x100000 0x300000; " \
-				"bootm 0x22000000"
 #elif defined(CONFIG_SYS_USE_DATAFLASH)
 /* bootstrap + u-boot + env + linux in data flash */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
-#else /* CONFIG_SD_BOOT */
-/* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_SIZE		0x4000
 #endif
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024 + 0x1000)
-
 /* SPL */
-#define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		0x6000
 #define CONFIG_SPL_STACK		0x308000
 
@@ -128,22 +85,7 @@
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
-#elif CONFIG_SPI_BOOT
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
-
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
 #endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
 
 #endif